Manufacturer
HP
Model Number
3630A
Description
Paintjet
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
3630A PAINTJET PRINTER HARDWARE SUPPORT MANUAL - USE THIS AND C1662-90010 FOR SE |
|
|
3630A PAINTJET PRINTER USER'S MANUAL |
|
|
ADDITIONAL SELF PACED TRAINING TEST - CONTAINS 1 TEST FOR 3630A & C1662A |
|
|
ADVANCED GLOSSY PHOTO PAPER - A SIZE (8.5 X 11-INCHES) - 25 SHEETS |
|
|
BAIL SPRING ON BOTH SIDES OF BAIL ARM - ATTACHES TO BOTH SIDES OF BAIL ARM |
|
|
BAIL WINDOW |
|
|
BASE ASSEMBLY - BOTTOM COVER |
|
|
BLACK PRINT CARTRIDGE - PRINTS APPROXIMATELY 900 PAGES OF STANDARD TEXT |
|
|
BROCHURE AND FLYER PAPER - GLOSSY ON BOTH SIDES - A SIZE (8.5 X 11-INCHES), 98 B |
|
|
CABLE CLIPE |
|
|
CARRIAGE ASSEMBLY - INCLUDES CARRIAGE PC BOARD |
|
|
CARRIAGE BELT |
|
|
CARRIAGE BELT DRIVE MOTOR |
|
|
CARRIAGE GUIDE ROLLER SUPPORT ARM |
|
|
CENTRONICS (PARALLEL) CABLE - 36-PIN (M) TO 25-PIN (M) - 2.0M (6.6FT) LONG |
|
|
CLUSTER GEAR - BETWEEN MEDIA MOTOR AND PLATEN GEAR |
|
|
COLOR INKJET CX CUT SHEET PAPER - A SIZE (8.5 X 11-INCHES) - 200 SHEETS PER PACK |
|
|
COLOR INKJET CX CUT SHEET PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS PER PAC |
|
|
COLOR INKJET CX TRANSPARENCY FILM - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
COLOR INKJET CX TRANSPARENCY FILM - A4 SIZE (21.0CM X 29.7CM) - 50 SHEETS |
|
|
COLOR PRINT CARTRIDGE (CONTAINS CYAN, MAGENTA, AND YELLOW) - PRINTS APPROXIMATEL |
|
|
COMPRESSION SPRING - STAINLESS STEEL, PASSIVITY FINISH, 0.709IN LONG, 0.466IN OD |
|
|
CONTROL PANEL ASSEMBLY - INCLUDES RIBBON CABLE |
|
|
COVER PLATE - FOR CENTRONICS CONNECTOR |
|
|
COVER PLATE - FOR HP-IB CONNECTOR |
|
|
COVER PLATE - FOR RS-232C CONNECTOR |
|
|
ENCODER STRIP |
|
|
GREETING CARD PAPER PACK (WHITE) - A SIZE (8.5 X 11-INCHES) - INCLUDES 20 SHEETS |
|
|
GUIDE ROLLER - MOUNTS ON THE FRONT OF THE CARRIAGE ASSEMBLY |
|
|
HEAD LATCH - RETAINS PRINT CARTRIDGE IN CARRIAGE ASSEMBLY |
|
|
HEX STANDOFF - 6-32 THREAD, 0.327-IN LONG, MALE/FEMALE - STEEL WITH BLACK COPPER |
|
|
HP TEXTURED HALF-FOLD GREETING CARDS (WHITE) - A SIZE (8.5 X 11-INCHES) |
|
|
INSTRUCTION CARD - IN TRAY ON BOTTOM OF PRINTER |
|
|
INSTRUCTION CARD TRAY - ATTACHES TO BOTTOM OF PRINTER |
|
|
LEAD FRAME BRUSH (CLEANING TOOL) - STORES IN THE RECESS ON THE BOTTOM OF THE PRI |
|
|
LEFT SIDE TRACTOR DRIVE (SPROCKET) ASSEMBLY ON PLATEN ROLLER |
|
|
LEFT SIDE TRACTOR DRIVE (SPROCKET) COVER (SHIELD) |
|
|
LEFT SIDEPLATE - MOUNTING STRUCTURE FOR DRIVE MOTORS |
|
|
LIFT UP FRONT COVER - PROTECTS THE PRINT CARTRIDGES - ATTACHES TO THE RIGHT SIDE |
|
|
LOWER PINCHWHEEL - ATTACHES TO SHIM ASSEMBLY (2 USED) |
|
|
MACHINE SCREW/STANDOFF (TEXTRON R86-20000-382) - 4-40 THREAD, 9.4MM LONG, HEX HE |
|
|
MAIN LOGIC BOARD - WITH CENTRONICS INTERFACE |
|
|
MAIN LOGIC BOARD - WITH HP-IB INTERFACE |
|
|
MAIN LOGIC BOARD - WITH RS-232C INTERFACE |
|
|
MOTOR CLAMP - SECURES MOTOR TO LEFT SIDE OF PRINT MECH |
|
|
PAN HEAD MACHINE SCREW - M3.0 X 0.5, 6MM LONG - CARBON STEEL, COPPER/NICKEL/CHRO |
|
|
PAPER BAIL ARM (BELOW WINDOW) - LIFT THIS TO LOAD PAPER |
|
|
PAPER DRIVE MOTOR |
|
|
PAPER SENSOR ARM |
|
|
PAPER SEPARATOR - ATTACHES TO CENTER OF TOP CASE |
|
|
PHOTO GREETING CARDS (WHITE, MATTE) - A SIZE (8.5 X 11-INCHES), HALF FOLD, PRE-S |
|
|
PHOTO QUALITY INKJET PAPER (MATTE) - WITH TWO SIDED MATTE FINISH - A SIZE (8.5 X |
|
|
PLATEN GEAR - ATTACHES TO END OF PLATEN ROLLER |
|
|
PLATEN KNOB - ON RIGHT SIDE OF PRINTER |
|
|
PLATEN ROLLER - LONG ROLLER BETWEEN TRACTOR DRIVE ASSEMBLIES |
|
|
POWER MODULE (TRANSFORMER) - 100VAC INPUT, 50-60HZ - 20VAC OUTPUT, 2A - HAS ATTA |
|
|
POWER MODULE (TRANSFORMER) - 220VAC INPUT, 50HZ - 20VAC OUTPUT, 2A (CHINA) |
|
|
POWER MODULE (TRANSFORMER) - 220VAC INPUT, 50HZ - 20VAC OUTPUT, 2A (DENMARK) |
|
|
POWER MODULE (TRANSFORMER) - 220VAC INPUT, 50HZ - 20VAC OUTPUT, 2A (SOUTH AFRICA |
|
|
POWER MODULE (TRANSFORMER) - 220VAC INPUT, 50HZ - 20VAC OUTPUT, 2A (SWITZERLAND) |
|
|
POWER MODULE (TRANSFORMER) - 240VAC INPUT, 50HZ - 20VAC OUTPUT, 2A - (AUSTRALIA, |
|
|
POWER MODULE (TRANSFORMER) - 240VAC INPUT, 50HZ - 20VAC OUTPUT, 2A - HAS ATTACHE |
|
|
POWER MODULE (TRANSFORMER, LUCENT 3301B2) - 220VAC INPUT, 50HZ, 0.25A - 10-0-10V |
|
|
PREMIUM PHOTO PAPER (GLOSSY) - A SIZE (8.5 X 11-INCHES) - 15 SHEETS |
|
|
PREMIUM PHOTO PAPER (GLOSSY) - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
PRIMER ABSORBER (LARGE) |
|
|
PRIMER ASSEMBLY - INCLUDES ABSORBER HOLDER, ABSORBER, PRIMER BLADDER, PRIMER LID |
|
|
PRIMER BLADDER (THIMBLE SHAPED) - PART OF PRIMER ASSEMBLY |
|
|
PROFESSIONAL BROCHURE AND FLYER PAPER (MATTE) - A SIZE (8.5 X 11-INCHES) - 50 SH |
|
|
PULLEY WEDGE - FOR CARRIAGE BELT TENSION |
|
|
RIBBON CABLE WHICH CONNECTS THE MAIN LOGIC BOARD TO THE PRINT MECHANISM |
|
|
RIGHT SIDE PLATE - HAS A WELL FOR THE CARRIAGE BELT TENSION PULLEY |
|
|
RIGHT SIDE TRACTOR DRIVE (SPROCKET) ASSEMBLY ON PLATEN ROLLER |
|
|
RIGHT SIDE TRACTOR DRIVE (SPROCKET) COVER (SHIELD) |
|
|
RS-232C CABLE - 25-PIN (M) TO 25-PIN (M) - 5.0M (16FT) LONG |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (F) - 1.2M (3.9FT) LONG |
|
|
RUBBER FOOT - REPLACEMENT RUBBER FOOT FOR THE BOTTOM OF THE PRINTER (FOUR USED) |
|
|
SELF PACED TRAINING KIT FOR 3630A PAINTJET AND C1662A PAINTWRITER - INCLUDES SER |
|
|
SLIDER ROD - SHAFT THAT THE CARRIAGE ASSEMBLY RIDES ON |
|
|
SMALL ABSORBER HOLDER - IN PRIMER ASSEMBLY |
|
|
STARWHEEL ASSEMBLY - SMALL PLASTIC WHEEL WITH METAL TEETH |
|
|
TOP COVER |
|
|
UPPER PINCHWHEEL HOLDER - ON BOTTOM OF BAIL ARM (2 USED) |
|
|
UPPER PINCHWHEEL SHAFT - MOUNTS TO BOTTOM OF PAPER BAIL ARM |
|
|
UPPER PINCHWHEEL SPRING - LOCATED ON BOTTOM OF PAPER BAIL ARM |
|
|
Z-FOLD INKJET CX PAPER - A SIZE (8.5 X 11-INCHES) FINISHED SHEETS - 250 SHEETS P |
|
|
Z-FOLD INKJET CX PAPER - A4 SIZE (21.0CM X 29.7CM) FINISHED SHEETS - 250 SHEETS |