Manufacturer
HP
Model Number
7475A
Description
6 Pen Plotter-7475a
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
7475A GRAPHICS PLOTTER INTERFACING AND PROGRAMMING MANUAL |
|
|
7475A GRAPHICS PLOTTER OPERATING & INTERCONNECTION MANUAL (FRENCH) |
|
|
7475A GRAPHICS PLOTTER OPERATING & INTERCONNECTION MANUAL (GERMAN) |
|
|
7475A GRAPHICS PLOTTER OPERATING & INTERCONNECTION MANUAL (ITALIAN) |
|
|
7475A GRAPHICS PLOTTER OPERATING & INTERCONNECTION MANUAL (JAPANESE) |
|
|
7475A GRAPHICS PLOTTER OPERATING & INTERCONNECTION MANUAL (SPANISH) |
|
|
7475A GRAPHICS PLOTTER OPERATING AND INTERCONNECTION MANUAL |
|
|
7475A GRAPHICS PLOTTER PROGRAMMER'S REFERENCE CARD |
|
|
7475A GRAPHICS PLOTTER SERVICE MANUAL |
|
|
CAROUSEL CLAW (SPRING LOADED ARM) - HOLDS PEN IN THE CAROUSEL |
|
|
CAROUSEL HUB (T SHAPED) - BOTTOM STRUCTURE OF THE CAROUSEL - DOES NOT INCLUDE TH |
|
|
CAROUSEL RING (SPIDER) - RING WITH STATIONARY PEN CLAWS IN CENTER OF THE CAROUSE |
|
|
CHASSIS - INTERNAL STRUCTURE/BED OF PLOTTER (BLACK PLASTIC) |
|
|
COMPRESSION SPRING - 302 STAINLESS STEEL, 1.18IN LONG, 0.334IN OD, 0.012IN WIRE |
|
|
CONNECTOR LOCK, SCREW TYPE (HEX STANDOFF) - FOR AMPHENOL 17 CONNECTOR |
|
|
COUPLER END CAP - FOR COUPLING MOTOR TO GRIT WHEEL SHAFT |
|
|
COUPLER O-RINGS - RED SILICONE RUBBER, 0.094-IN ID, 0.050-IN DIAMETER CROSS-SECT |
|
|
COUPLER RING - FOR COUPLING MOTOR TO GRIT WHEEL DRIVE SHAFT |
|
|
COVER PLATE - FOR HP-IB CONNECTOR |
|
|
COVER PLATE - FOR RS-232C CONNECTOR |
|
|
EXTENSION SPRING - STAINLESS STEEL, PASSIVITY FINISH, 69MM LONG, 4.75MM OD, 700U |
|
|
EXTENSION SPRING FOR PEN CLAW - STAINLESS STEEL, PASSIVITY FINISH, 21.2MM LONG, |
|
|
FIBER TIP PEN CAROUSEL |
|
|
FRONT PANEL WITH LOGO - HAS HOLES FOR KEYBOARD SWITCHES |
|
|
FUSE - 1.6A, 250V MAX - 5.2MM DIA. X 20MM LONG, GLASS BODY |
|
|
FUSE - 3.15A, 250V MAX - 5.2MM DIA. X 20MM LONG, GLASS BODY |
|
|
FUSE - 600MA, 250V MAX - .25IN DIA. X 1.25IN LONG, GLASS BODY |
|
|
FUSE - 800MA, 250V MAX - 5.2MM DIA. X 20MM LONG, GLASS BODY |
|
|
FUSEHOLDER CAP (BLACK) - FOR 220V/240V OPERATION |
|
|
FUSEHOLDER CAP (GRAY) |
|
|
GARTER SPRING (SPRING LOOP) - 302 STAINLESS STEEL, 90MM LONG, 1.58MM OD, 200UM W |
|
|
HEX STANDOFF - 6-32 THREAD, 0.327-IN LONG, MALE/FEMALE - STEEL WITH BLACK COPPER |
|
|
LEFT PINCHWHEEL ARM |
|
|
LIFT-UP VIEWING WINDOW |
|
|
MOTOR/ENCODER ASSEMBLY |
|
|
MOTOR/ENCODER ASSEMBLY - 'X' AXIS DRIVE (GRIT WHEEL) |
|
|
PAPER BAIL - WIRE RACK UNDERNEATH THE PLOTTER |
|
|
PEN BOOTS - FOR REFILLABLE DRAFTING PEN CAROUSEL (SIX PER PACKAGE) |
|
|
PEN CARRIAGE (HOLDER) ASSEMBLY |
|
|
PEN CARRIAGE DAMPER (RUBBER BOOT) - ON BACK OF CARRIAGE ASSEMBLY |
|
|
PEN HOLDING ARM (CLAW) - ON CARRIAGE ASSEMBLY |
|
|
PEN LIFT BAR (METAL) - ATTACHES TO PEN LIFT SOLENOID |
|
|
PEN LIFT BAR END CAP - HAS ACTUATING PIN WHICH EXTENDS THROUGH THE EYELET IN THE |
|
|
PEN LIFT SOLENOID ASSEMBLY |
|
|
PINCHWHEEL LIFT HANDLE - PAPER LOADING LEVER |
|
|
POWER MODULE ASSEMBLY - INCLUDES FUSE HOLDER AND POWER SWITCH (BLACK PLASTIC STR |
|
|
POWER TRANSFORMER (7470) - 100/120/220/240VAC INPUT, 15.2/30.3/9.98/20.3VDC OUTP |
|
|
REFILLABLE DRAFTING PEN CAROUSEL |
|
|
RETAINING E-RING - 0.125-IN DIAMETER, STEEL ZINC-CLEAR CHROMATE |
|
|
RIGHT PINCHWHEEL ARM |
|
|
RS-232C CABLE - 25-PIN (M) TO 25-PIN (M) - 5.0M (16FT) LONG |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (F) - 1.2M (3.9FT) LONG |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 8-PIN (M) DIN - 1.5M (4.9FT) LONG |
|
|
SELF PACED TRAINING KIT FOR 7475A GRAPHICS PLOTTER - INCLUDES SERVICE MANUAL AND |
|
|
SELF PACED TRAINING TEST - CONTAINS 1 TEST FOR 7475A PLOTTER |
|
|
SOLENOID COMPRESSION SPRING - 302 STAINLESS STEEL, 1.0IN LONG, 0.585IN OD, 0.025 |
|
|
TENSIONING WEDGE - FOR THE CARRIAGE DRIVE BELT IDLER PULLEY |
|
|
TOP CASE - DOES NOT INCLUDE WINDOW |
|
|
TURRET PAWL SPRING (SPRING LOOP) - STAINLESS STEEL, PASSIVITY FINISH, 59MM LONG, |