Manufacturer
HP
Model Number
7599AY
Description
Hp7599a, A0/e Rollfeed, 4 User Plotter
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
36IN TAKE-UP CORE - EMPTY ROLL FOR PAPER ROLLFEED OPERATION |
|
|
ADJUSTABLE PEN CAROUSEL - FOR ALL TYPES OF PENS |
|
|
CABLE ASSEMBLY - 2-PIN (F) CONNECTOR TO 2-PIN (F) CONNECTOR - 17CM (6.8IN) LONG |
|
|
CABLE ASSEMBLY - 2-PIN (F) CONNECTOR TO TWO INDIVIDUAL MINIATURE (F) SPADE CONNE |
|
|
CABLE ASSEMBLY - 2-PIN (F) CONNECTOR TO TWO SPADE (F) CONNECTORS - 62.2CM (24.5I |
|
|
CABLE ASSEMBLY - 6-PIN (F) CONNECTOR TO BOTH A 5-PIN (F) CONNECTOR AND A GROUND |
|
|
CABLE ASSEMBLY - 6-PIN (M) CONNECTOR AND GROUND WIRE WITH RING TERMINAL TO 7-PIN |
|
|
CABLE ASSEMBLY - A 5-PIN (F) CONNECTOR AND A GROUND WIRE WITH A RING TERMINAL TO |
|
|
CAPPER CAM - LOCATED IN THE CAROUSEL BASE - FORCES THE PEN BOOT DOWN |
|
|
CAROUSEL BODY - BOTTOM HALF OF THE CAROUSEL ASSEMBLY |
|
|
CAROUSEL PAWL - SPRING LOADED ARM THAT HOLDS THE PEN IN THE CAROUSEL |
|
|
CAROUSEL TOP STRUCTURE (T-SHAPED) |
|
|
CARRIAGE BELT |
|
|
CARRIAGE COVER - PROTECTS CARRIAGE ASSEMBLY |
|
|
CHASSIS ASSEMBLY (CURVED METAL STRUCTURE) - BETWEEN THE LEFT AND RIGHT FLOOR STA |
|
|
COMPRESSION BIAS SPRING - 302 STAINLESS STEEL, PASSIVITY FINISH, 58.6MM LONG, 12 |
|
|
COMPRESSION SPRING - FOR THE PEN HOLDING ARM ON THE CARRIAGE ASSEMBLY |
|
|
CONTROL (FRONT) PANEL ASSEMBLY - DOES NOT INCLUDE LCD DISPLAY |
|
|
DECAPPER FOOT - LOCATED ON THE BOTTOM OF THE CARRIAGE ASSEMBLY - FOR USE WITH PL |
|
|
DISK DRIVE POWER SUPPLY BOARD |
|
|
EPROM (U16) - ON 7599A PROCESSOR BOARD |
|
|
EPROM (U17) - ON 7599A PROCESSOR BOARD |
|
|
EXTENSION SPRING - 302 STAINLESS STEEL, 44.45MM LONG, 12.7MM OD, 1.14MM WIRE DIA |
|
|
EXTENSION SPRING - 302 STAINLESS STEEL, PASSIVITY FINISH, 54.4MM LONG, 2.4MM OD, |
|
|
FUSE - 2A, 250V MAX - 5.2MM DIA. X 20MM LONG, GLASS BODY |
|
|
GRIT WHEEL SHAFT ASSEMBLY - INCLUDES THE SHAFT, THREE LONG ROUGH ROLLERS, SIX BE |
|
|
HEX NUT WITH NYLON LOCKING COLLAR - M6 X 1.0, 6MM THICK - STEEL, ZINC PLATED (PA |
|
|
HP-GL/2 & HP RTL REFERENCE GUIDE - PROGRAMMING INFORMATION, HANDBOOK FOR DEVELOP |
|
|
HP-IB CABLE - 24 PIN (M/F) TO 24 PIN (M/F) - 2.0M (6.6FT) LONG |
|
|
IDLER PULLEY - APPLIES TENSION TO THE CARRIAGE BELT (ON LEFT END OF THE MAIN CHA |
|
|
INTERLOCK LEVER (SPRING LOADED) - ON THE LEFT SIDE OF THE CAROUSEL BASE (NEXT TO |
|
|
LABEL - LABELS THE TOP OF THE FIBER-TIP PEN CAROUSEL |
|
|
LATCH ARM (SPRING LOADED) - PUSHES THE SUPPLY (OR TAKE-UP) SPINDLE ROD ASSEMBLY |
|
|
LEFT HAND PINCHWHEEL LIFT ARM ASSEMBLY |
|
|
LEFT INSIDE PANEL - COVERS AND AREA FROM CASTERS TO TOP OF PLOTTER |
|
|
LEFT SIDE COVER - COVERS THE AREA FROM THE CASTERS TO THE TOP OF THE PLOTTER |
|
|
LEVELING MOUNT (FOOT) - LOCATED ON THE BOTTOM OF THE SIDE PANELS (FOUR USED) |
|
|
LEVELING SCREW |
|
|
LIFT-UP VIEWING WINDOW |
|
|
MAIN BELT TENSIONING WEDGE - APPLIES TENSION TO CARRIAGE BELT PULLEY |
|
|
MICROSWITCH - FOR DETECTING SUPPLY PAPER ROLL IN THE ROLL FEED ASSEMBLY |
|
|
MOTOR/ENCODER ASSEMBLY |
|
|
MOTOR/ENCODER ASSEMBLY |
|
|
NAMEPLATE - HP 7595A DRAFTMASTER I PLOTTER LOGO |
|
|
NUT M5 |
|
|
PAPER TAKE-UP MOTOR (DOES NOT INCLUDE PULLEY) |
|
|
PAWL RETAINER SPRING - 302 STAINLESS STEEL, 1.6MM OD, 250UM WIRE DIAMETER - HOLD |
|
|
PC BOARD GUIDE |
|
|
PEN BOOTS - FOR DRAFTING PEN CAROUSELS (EIGHT PER PACKAGE) |
|
|
PEN BOOTS - FOR FIBER TIP OR ROLLERBALL PEN CAROUSELS (EIGHT PER PACKAGE) |
|
|
PEN CAROUSEL DRIVE MOTOR |
|
|
PEN CARRIAGE ASSEMBLY - INCLUDES COVER |
|
|
PEN HOLDING ARM (PAWL) |
|
|
PHOTO SENSOR/LED ASSY - WITH CABLE ASSEMBLY |
|
|
PHOTOSWITCH OR LED SOURCE COVER CAP |
|
|
PINCHWHEEL LIFT HANDLE - ON RIGHT PINCHWHEEL ARM ASSEMBLY |
|
|
PINCHWHEEL LIFT SHAFT (SQUARE) - IN THE PLATEN ASSEMBLY |
|
|
POWER MODULE ASSEMBLY - INCLUDES POWER RECEPTACLE, VOLTAGE SELECT DRUM, AND FUSE |
|
|
POWER SUPPLY BOARD - INCLUDES FUSE, POWER SWITCH, AND RECEPTACLE |
|
|
POWER SWITCH |
|
|
POWER TRANSFORMER (LUCENT/AGERE 3422A) - 100/120/220/240VAC INPUT, 47.5-66HZ - 8 |
|
|
PULLEY KIT - INCLUDES GRIT WHEEL DRIVE PULLEY, MOUNTING PLATE, AND SCREWS - MOUN |
|
|
REDUCTION PULLEY - FROM MOTOR BELT TO THE 3 CARRIAGE BELTS |
|
|
RETAINING E-RING - 0.125-IN DIAMETER, STEEL ZINC-CLEAR CHROMATE |
|
|
RIBBON CABLE |
|
|
RIBBON CABLE |
|
|
RIBBON CABLE - 40-PIN (F) CONNECTOR TO 40-PIN (F) CONNECTOR - 25MM (1.0IN) LONG |
|
|
RIGHT HAND PINCHWHEEL LIFT ARM ASSEMBLY |
|
|
RIGHT INSIDE PANEL - COVERS AREA FROM CASTERS TO TOP OF PLOTTER |
|
|
RIGHT SIDE COVER - COVERS THE AREA FROM THE CASTERS TO THE TOP OF THE PLOTTER |
|
|
ROLL FEED FILTER BOARD - MOUNTS ON REAR OF ROLL FEED MOTOR |
|
|
ROLLFEED DRIVE BELT |
|
|
SHIELDED RIBBON CABLE ASSEMBLY - 24-PIN (F) CONNECTOR TO 24-PIN (F) CONNECTOR - |
|
|
SPUR GEAR - ROTATES THE SUPPLY (OR TAKE-UP) SPINDLE ROD ASSEMBLY |
|
|
SUPPLY BRAKE (CLUTCH) ASSEMBLY - DRIVES THE SUPPLY SPINDLE ROD ASSEMBLY |
|
|
SWIVEL STEM (ONE USED FOR EACH CASTER) |
|
|
TAKE-UP CLUTCH/DRIVE GEAR ASSEMBLY - DRIVES THE TAKE-UP ROD ASSEMBLY VIA THE SPU |
|
|
TORSION COIL SPRING - STAINLESS STEEL, PASSIVITY FINISH, 12MM LONG, 9.5MM OD, 58 |
|
|
TRAILING CABLE ASSEMBLY WITH ATTACHED CLIP - 15-PIN (F) CONNECTORS - 1.8M (5.9FT |
|
|
TUBEAXIAL FAN (MATSUSHITA FBK-08A12LZ) - 71.5MM (2.82IN) MOUNTING HOLE SPACING. |
|
|
TUBEAXIAL FAN - 105MM (4.126IN) MOUNTING HOLE SPACING, 38.1MM (1.5IN) THICK, 9.5 |