Manufacturer
HP
Model Number
C2859B
Description
Designjet 650c (e-size)
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
'DAISY CHAIN' POWER CORD (DOVE GRAY) - 18 AWG, 1.2M (4.0FT) LONG - HAS C14 (M) P |
|
|
'X' AXIS MOTOR MOUNT |
|
|
16MB, 70NS, 36-BIT PARITY SIMM MEMORY MODULE |
|
|
32MB, 70NS, 36-BIT PARITY SIMM MEMORY MODULE |
|
|
4MB, 80NS, 36-BIT SIMM MEMORY MODULE |
|
|
4MB, 80NS, 36-BIT SIMM MEMORY MODULE - FOR HP LASERJET IIISI, 4/4M, 4SI/MX |
|
|
8MB, 80NS, 36-BIT SIMM MEMORY MODULE - FOR HP LASERJET IIISI, 4/4M, 4SI/MX |
|
|
ABSORBER |
|
|
AC POWER RECPTACLE ASSEMBLY - INCLUDES RECEPTACLE, WIRES, GROUNDING LUG, AND SOC |
|
|
ADOBE'S POSTSCRIPT (LEVEL TWO) SIMM MODULE |
|
|
APPLETALK (LOCALTALK) INTERFACE BOARD - HAS DIN-8 CONNECTOR |
|
|
AXIAL BIAS PLATE - INSTALLED BETWEEN THE PAPER DRIVE (PLATEN) ROLLER ASSEMBLY AN |
|
|
BRIGHT WHITE INKJET PAPER - 91.4CM (36IN) X 45.7M (150FT) ROLL |
|
|
BUSHING FOR REDUCTION PULLEY |
|
|
CABLE ASSEMBLY WITH FERRITE - 18-PIN (F) CONNECTOR TO FOUR CABLES - OTHER CONNEC |
|
|
CABLE CLAMP |
|
|
CABLE HARNESS ASSEMBLY |
|
|
CARTRIDGE CAP - KEEPS CARTRIDGES FROM DRYING OUT WHEN CARRIAGE IS PARKED IN SERV |
|
|
CENTRONICS (PARALLEL) CABLE - 36-PIN (M) TO 25-PIN (M) - 2.0M (6.6FT) LONG |
|
|
CLAMP - HOLDS FERRITE IN PLACE WITHIN ELECTRONICS ENCLOSURE |
|
|
COATED PAPER (98 GSM) - 91.4CM (36IN) X 45.7M (150FT) ROLL (USA, CANADA, AND LAT |
|
|
COLOR INKJET CUT SHEET PAPER - A0 SIZE (84.1CM X 118.9CM) - 100 SHEETS PER PACKA |
|
|
COLOR INKJET CUT SHEET PAPER - A1 SIZE (59.4CM X 84.1CM) - 100 SHEETS PER PACKAG |
|
|
COLOR INKJET CUT SHEET PAPER - ARCHITECTURAL D SIZE (24 X 36-INCHES) - 100 SHEET |
|
|
COLOR INKJET CUT SHEET PAPER - ARCHITECTURAL E SIZE (36 X 48-INCHES) - 100 SHEET |
|
|
COLOR INKJET CUT SHEET PAPER - D SIZE (22 X 34-INCHES) - 100 SHEETS PER PACKAGE |
|
|
COLOR INKJET CX CUT SHEET PAPER - A SIZE (8.5 X 11-INCHES) - 200 SHEETS PER PACK |
|
|
COLOR INKJET CX CUT SHEET PAPER - A3 SIZE (29.7CM X 42.0CM) - 200 SHEETS PER PAC |
|
|
COLOR INKJET CX CUT SHEET PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS PER PAC |
|
|
COLOR INKJET CX CUT SHEET PAPER - B SIZE (11 X 17-INCHES) - 200 SHEETS PER PACKA |
|
|
COLOR INKJET PAPER - 61CM (24IN) X 45.7M (150FT) ROLL |
|
|
COLOR INKJET PAPER - 91.4CM (36IN) X 45.7M (150FT) ROLL |
|
|
CONTROL PANEL OVERLAY (ENGLISH) |
|
|
CONTROL PANEL OVERLAY (FRENCH) |
|
|
CONTROL PANEL OVERLAY (ITALIAN) |
|
|
CONTROL PANEL OVERLAY (JAPANESE) |
|
|
CONTROL PANEL OVERLAY (PORTUGUESE) |
|
|
CONTROL PANEL OVERLAY (SPANISH) |
|
|
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
|
|
CUTTER BUSHING - CONNECTS CUTTER ASSEMBLY TO SLIDER ROD |
|
|
CUTTER MECHANISM ASSEMBLY - AUTO CUTTER FOR ROLLFEED PAPER |
|
|
CUTTER SHIM/BAIL SPRING |
|
|
CYAN (BLUE) INK CARTRIDGE - HAS INK LEVEL INDICATOR (USA) |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C MANUAL KIT - INCLUDES 'USING FRONT PANEL', 'SETTING UP FOR PLOTTI |
|
|
DESIGNJET 650C SERVICE MANUAL (ENGLISH) |
|
|
DESIGNJET CLEANING KIT - INCLUDES CLEANING SOLUTION AND 20 CLEANING RAGS |
|
|
DESIGNJET SUPPORT DVD-ROM - VERSION A.04.01 - HAS PRODUCT INFORMATION, USER'S MA |
|
|
EEPROM (U42) - ON MAIN LOGIC BOARD |
|
|
ENCLOSURE - METAL STRUCTURE THAT FORMS THE BASE OF THE ELECTRONICS ENCLOSURE ASS |
|
|
ENCODER SPRING |
|
|
ENCODER SPRING BRACKET - LOCATED ON THE RIGHT SIDE OF THE PLOTTER |
|
|
ENTRY PLATEN - INSTALLED OVER THE PAPER DRIVE (PLATEN) ROLLER ASSEMBLY |
|
|
ETHERTWIST (10BASE-T) LAN INTERFACE BOARD |
|
|
EXTENSION SPRING - HOLDS THE ROLLFEED ACCESS COVER CLOSED |
|
|
EXTERNAL JETDIRECT 170X LAN INTERFACE MODULE - INTERFACES A PARALLEL PRINTER TO |
|
|
EXTERNAL JETDIRECT 170X LAN INTERFACE MODULE - INTERFACES A PARALLEL PRINTER TO |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE AND POWER MODULE - HAS ETHERTWIST (10BAS |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST 10BASE-T/100BASETX CONNE |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH RJ-45 CONNECTOR FOR ETHERTWIST (10B |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH RJ-45 CONNECTOR FOR ETHERTWIST (10B |
|
|
EXTERNAL TOKEN RING INTERFACE MODULE - HAS DB-9 CONNECTOR |
|
|
FINAL EXAM RETURN ENVELOPES - CONTAINS 10 ENVELOPES |
|
|
HARDWARE KIT - PACKAGE OF 6 SCREWS FOR STAND ASSEMBLY |
|
|
HEAVYWEIGHT COLOR INKJET PAPER - 61CM (24IN) X 45.7M (150FT) ROLL |
|
|
HEAVYWEIGHT COLOR INKJET PAPER - 91.4CM (36IN) X 45.7M (150FT) ROLL |
|
|
HOLDER - FOR 'HELP' CARD AND HAND HELD CUTTER |
|
|
HP INK CRTG 50C CYAN AP |
|
|
HP INK CRTG 50C CYAN EUR |
|
|
HP INK CRTG 50M MAGENTA EUR |
|
|
HP INK CRTG 50Y YELLOW AP |
|
|
HP INK CRTG 50Y YELLOW EUR) |
|
|
HP JETDIRECT 300X EXTERNAL PRINT SERVER MODULE (10BASE-T AND 100BASE-TX) - CONNE |
|
|
HP JETDIRECT 500X EXTERNAL TOKEN RING PRINT SERVER MODULE - INTERFACES UP TO 3 P |
|
|
HP JETDIRECT 500X EXTERNAL TOKEN RING PRINT SERVER MODULE - INTERFACES UP TO 3 P |
|
|
HP RTL REFERENCE GUIDE - PROGRAMMING INFORMATION |
|
|
HP SCITEX LATEX PRINTHEAD RETURN KIT |
|
|
HP-GL REFERENCE GUIDE - PROGRAMMING INFORMATION |
|
|
HP-GL/2 & HP RTL REFERENCE GUIDE - PROGRAMMING INFORMATION, HANDBOOK FOR DEVELOP |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
INK DROP RESERVOIR - INSTALLS ON RIGHT SIDE OF PLOTTER |
|
|
INTERCONNECT BOARD |
|
|
LEFT BELT CLAMP - ATTACHES CARRIAGE BELT TO CARRIAGE |
|
|
LEFT END COVER ASSEMBLY - FOR END OF UPPER STAND (CHASSIS) |
|
|
LEG ASSEMBLY - SIDE SUPPORT WITH FOOT BAR AND TWO CASTERS |
|
|
MAGENTA (RED) INK CARTRIDGE - HAS INK LEVEL INDICATOR (USA) |
|
|
MAINTENANCE KIT |
|
|
MEDIA BIN ADJUST - ADJUSTABLE MEDIA BOTTOM STOP IN WIRE RACK |
|
|
MEDIA BIN BACK - FOR TOP OF WIRE RACK BELOW PLOTTER |
|
|
MEDIA BIN FRONT - MAIN PART OF WIRE RACK BELOW PLOTTER |
|
|
MEDIA SENSOR MOUNTING BRACKET |
|
|
MIO BOARD GUIDE |
|
|
MIO SLOT ACCESS COVER |
|
|
MIO SUPPORT - METAL HOUSING FOR THE PLUG-IN MIO CARD - DOES NOT INCLUDE THE BOAR |
|
|
NAMEPLATE - DESIGNJET 650C PRINTER LOGO |
|
|
OPAQUE BOND PAPER - 61CM (24IN) X 45.7M (150FT) ROLL |
|
|
OPAQUE BOND PAPER - ARCHITECTURAL D SIZE (24 X 36-INCHES) - 100 SHEETS |
|
|
OPAQUE BOND PAPER - ARCHITECTURAL E SIZE (36 X 48-INCHES) - 100 SHEETS |
|
|
OVERDRIVE MOUNT BLOCK |
|
|
OVERDRIVE SUPPORT ASSEMBLY (E) |
|
|
PAPER DRIVE (PLATEN) ROLLER ASSEMBLY - LONG GEAR DRIVEN ROLLER - INCLUDES ROLLER |
|
|
PINCHARM SENSOR - INCLUDES CABLE |
|
|
PINCHARM SENSOR - INCLUDES CABLE |
|
|
POLYESTER MATTE FILM - 61CM (24IN) X 36.6M (120FT) ROLL |
|
|
POLYESTER MATTE FILM - 91.4CM (36IN) X 36.6M (120FT) ROLL |
|
|
POLYESTER MATTE FILM - A0 SIZE (84.1CM X 118.9CM) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - A1 SIZE (59.4CM X 84.1CM) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - A3 SIZE (29.7CM X 42.0CM) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - ARCHITECTURAL E SIZE (36 X 48-INCHES) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - B SIZE (11 X 17-INCHES) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - D SIZE (22 X 34-INCHES) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - E SIZE (34 X 44-INCHES) - 40 SHEETS |
|
|
POWER CORD (FLINT GRAY) - 18 AWG, 3-WIRE, 2.3M (7.5FT) LONG - HAS STRAIGHT (F) R |
|
|
POWER MODULE (WALL MOUNT) - INPUT VOLTAGE 100VAC, 47/63HZ - OUTPUT VOLTAGE 13VDC |
|
|
POWER MODULE (WALL MOUNT) - INPUT VOLTAGE 120VAC, 60HZ - OUTPUT VOLTAGE 12VDC, 1 |
|
|
POWER SUPPLY INSULATOR (BOTTOM) |
|
|
POWER SUPPLY INSULATOR (TOP) - INSTALLED OVER THE POWER SUPPLY |
|
|
POWER SWITCH ASSEMBLY - INCLUDES CABLE |
|
|
REPACKAGING KIT - FOR MAIN PLOTTER UNIT |
|
|
RESERVOIR - ATTACHES TO LEFT SIDE CHASSIS - INK ABSORBER IS INSERTED INTO THIS R |
|
|
RETAINING E-RING - 0.250-IN DIAMETER, STEEL ZINC-DICHROMATE DIP |
|
|
RETURN KIT - FOR RETURNING DEFECTIVE THERMAL INKJET (TIJ) 2.5 CARTRIDGES - INCLU |
|
|
RIBBON CABLE - 5-PIN (F) CONNECTOR TO 5-PIN (F) CONNECTOR - 40.3CM (15.9IN) LONG |
|
|
RIGHT BELT CLAMP - ATTACHES CARRIAGE BELT TO CARRIAGE |
|
|
RIGHT END COVER - FOR END OF UPPER STAND (CHASSIS) ASSEMBLY |
|
|
ROLLFEED ACCESS COVER - OPENS FORWARD TO ALLOW ACCESS TO PAPER SPINDLE ASSEMBLY |
|
|
ROM - (U30)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
|
|
ROM - (U31)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
|
|
ROM - (U32)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
|
|
ROM - (U33)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (F) - 1.2M (3.9FT) LONG |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 8-PIN (M) DIN - 1.5M (4.9FT) LONG |
|
|
SAFETY LABEL - PROVIDES WARNING THAT ENCODER STRIP IS SHARP |
|
|
SELF PACED TRAINING KIT FOR DESIGNJET 650C PLOTTERS - INCLUDES SERVICE MANUAL, N |
|
|
SELF PACED TRAINING KIT FOR DESIGNJET 650C PLOTTERS - INCLUDES SERVICE MANUAL, P |
|
|
SIMM MODULE SHIELD |
|
|
SIMM PLATE - COVERS ACCESS TO SIMM SLOT CONNECTORS |
|
|
SLEEVE BEARING - USED ON LEFT END OF OVERDRIVE ASSEMBLY |
|
|
SPECIAL INKJET CUT SHEET PAPER - E SIZE (34 X 44-INCHES) - 100 SHEETS PER PACKAG |
|
|
SPLIT FERRITE - INSTALLED INSIDE ELECTRONICS ENCLOSURE |
|
|
STARWHEEL MOUNT ASSEMBLY - INCLUDES COVER, BODY, SPRING AND TWO STARWHEELS |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TRANSLUCENT BOND PAPER - 91.4CM (36IN) X 45.7M (150FT) ROLL |
|
|
TUBEAXIAL FAN (MATSUSHITA FBK-09A12M2-MOD) - 82.5MM (3.25IN) MOUNT HOLE SPACING, |
|
|
Y-TENSIONER BRACKET ON LEFT SIDE PLATE |
|
|
YELLOW INK CARTRIDGE - HAS INK LEVEL INDICATOR (USA) |