Manufacturer
HP
Model Number
C3187A
Description
Designjet 220 (d-size)
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
'DAISY CHAIN' POWER CORD (DOVE GRAY) - 18 AWG, 1.2M (4.0FT) LONG - HAS C14 (M) P |
|
|
'X' AXIS MOTOR MOUNT |
|
|
2MB, 80NS, 36-BIT SIMM MEMORY MODULE |
|
|
4MB, 80NS, 36-BIT SIMM MEMORY MODULE |
|
|
4MB, 80NS, 36-BIT SIMM MEMORY MODULE - FOR HP LASERJET IIISI, 4/4M, 4SI/MX |
|
|
8MB, 80NS, 36-BIT SIMM MEMORY MODULE - FOR HP LASERJET IIISI, 4/4M, 4SI/MX |
|
|
AC POWER RECEPTACLE ASSEMBLY - INCLUDES CABLE |
|
|
ADDITIONAL SELF PACED TRAINING TEST - CONTAINS 1 TEST |
|
|
AUTOMATIC CARTRIDGE ADJUST LINKAGE |
|
|
BAIL SWITCH ASSEMBLY |
|
|
BLACK PRINT CARTRIDGE (HIGH CAPACITY) - (2 PACK OF 51626AE) - EACH ONE PRINTS AP |
|
|
BLACK PRINT CARTRIDGE (REGULAR) - PRINTS APPROXIMATELY 397 PAGES BASED ON 5% DEN |
|
|
BLACK PRINT CARTRIDGES (HIGH CAPACITY) - (TWO-PACK OF 51626A) EACH PRINTS APPROX |
|
|
BLADE SPRING - INSTALLED ON RIGHT SIDE OF TRAILING CABLE FRONT GUIDE |
|
|
BOTTOM COVER |
|
|
BRACKET FOR BAIL SWITCH ASSEMBLY - INSTALLED TO THE RIGHT SIDE PLATE OF THE PLOT |
|
|
BUSHING FOR REDUCTION PULLEY |
|
|
C3180/81A & C3187/88A DESIGNJET PLOTTER SERVICE MANUAL |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (ENGLISH) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (FRENCH) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (GERMAN) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (JAPANESE) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (KOREAN) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (PORTUGUESE) |
|
|
C3187A & C3188A DESIGNJET PLOTTER USER'S GUIDE (SPANISH) |
|
|
CENTRONICS (PARALLEL) CABLE - 36-PIN (M) TO 25-PIN (M) - 2.0M (6.6FT) LONG |
|
|
CLAMP - HOLDS FERRITE IN PLACE WITHIN ELECTRONICS ENCLOSURE |
|
|
COMPRESSION SPRING - INSTALLED BETWEEN PINCHARM ASSEMBLY AND BUSHING |
|
|
COMPRESSION TENSIONER SPRING - STAINLESS STEEL, PASSIVITY FINISH, 41.3MM LONG, 9 |
|
|
CONTROL PANEL - MOUNTS IN CONTROL PANEL SUPPORT |
|
|
COVER - TOP CENTER OF PLOTTER |
|
|
DESIGNJET 230/250C OPTIONAL STAND (D/A1) - INCLUDES LEGS, CASTERS AND BRACE - DO |
|
|
DESIGNJET SUPPORT DVD-ROM - VERSION A.04.01 - HAS PRODUCT INFORMATION, USER'S MA |
|
|
DOOR - ON RIGHT HALF OF FRONT PANEL BEZEL |
|
|
DOOR FOR TENSIONER HOUSING |
|
|
ELECTRONICS ENCLOSURE - THE LARGER OF THE TWO METAL COVERS FOR THE AREA CONTAINI |
|
|
ELECTRONICS ENCLOSURE - THE SMALLER OF THE TWO METAL COVERS FOR THE AREA CONTAIN |
|
|
ENCODER SPRING BRACKET |
|
|
ENCODER STRIP ASSEMBLY (D-SIZE) - INCLUDES ENCODER STRIP AND ENCODER STRIP SPRIN |
|
|
ENCODER STRIP BRACKET |
|
|
ENCODER STRIP SPRING - INSTALLED ON RIGHT SIDE OF PLOTTER |
|
|
ENTRY PLATEN - LARGE STRUCTURE IN FRONT OF PLATEN ROLLER |
|
|
EXTERNAL JETDIRECT 170X LAN INTERFACE MODULE - INTERFACES A PARALLEL PRINTER TO |
|
|
EXTERNAL JETDIRECT 170X LAN INTERFACE MODULE - INTERFACES A PARALLEL PRINTER TO |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE AND POWER MODULE - HAS ETHERTWIST (10BAS |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST (10BASE-T) CONNECTOR |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH ETHERTWIST 10BASE-T/100BASETX CONNE |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH RJ-45 CONNECTOR FOR ETHERTWIST (10B |
|
|
EXTERNAL JETDIRECT LAN INTERFACE MODULE WITH RJ-45 CONNECTOR FOR ETHERTWIST (10B |
|
|
EXTERNAL TOKEN RING INTERFACE MODULE - HAS DB-9 CONNECTOR |
|
|
FRONT PANEL BEZEL - MOUNTS OVER FRONT PANEL |
|
|
HANDLE - RIGHT SIDE OF PLOTTER - RAISE TO LOAD PAPER |
|
|
HARDWARE KIT - PACKAGE OF 6 SCREWS FOR STAND ASSEMBLY |
|
|
HELP CARD LOCK - MOUNTS TO TOP OF FOLD OUT FRONT PANEL DOOR |
|
|
HP 26A LGE BLACK INKJET CRTG AP |
|
|
HP 26A LGE BLACK INKJET CRTG CAN |
|
|
HP 26A LGE BLACK INKJET CRTG LAR |
|
|
HP 26A PRINT CARTRIDGE (BLACK) - HIGH CAPACITY, 40ML VOLUME - PRINTS APPROXIMATE |
|
|
HP JETDIRECT 300X EXTERNAL PRINT SERVER MODULE (10BASE-T AND 100BASE-TX) - CONNE |
|
|
HP JETDIRECT 500X EXTERNAL TOKEN RING PRINT SERVER MODULE - INTERFACES UP TO 3 P |
|
|
HP JETDIRECT 500X EXTERNAL TOKEN RING PRINT SERVER MODULE - INTERFACES UP TO 3 P |
|
|
HP RTL REFERENCE GUIDE - PROGRAMMING INFORMATION |
|
|
HP-GL REFERENCE GUIDE - PROGRAMMING INFORMATION |
|
|
HP-GL/2 & HP RTL REFERENCE GUIDE - PROGRAMMING INFORMATION, HANDBOOK FOR DEVELOP |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
LEFT CAM JOURNAL - MOUNTED ON LEFT END OF PINCH ARM SHAFT |
|
|
LEFT END COVER ASSEMBLY - FOR END OF UPPER STAND (CHASSIS) |
|
|
LEG ASSEMBLY - SIDE SUPPORT WITH FOOT BAR AND TWO CASTERS |
|
|
LIFT-UP VIEWING WINDOW ASSEMBLY |
|
|
LINKAGE SPRING - INSTALLED BETWEEN Y-TENSIONER BRACKET AND AUTOMATIC CARRIAGE AD |
|
|
MACHINE SCREW/STANDOFF (TEXTRON R86-20000-382) - 4-40 THREAD, 9.4MM LONG, HEX HE |
|
|
MAIN TENSIONING WEDGE - FOR THE CARRIAGE DRIVE BELT IDLER PULLEY |
|
|
MAINTENANCE KIT |
|
|
MEDIA BIN ADJUST - ADJUSTABLE MEDIA BOTTOM STOP IN WIRE RACK |
|
|
MEDIA BIN BACK - FOR TOP OF WIRE RACK BELOW PLOTTER |
|
|
MEDIA BIN FRONT - MAIN PART OF WIRE RACK BELOW PLOTTER |
|
|
MEDIA GUIDE |
|
|
MEDIA SENSOR ASSEMBLY |
|
|
NAMEPLATE - DESIGNJET 200/220 PRINTER LOGO |
|
|
OPAQUE BOND PAPER - ARCHITECTURAL D SIZE (24 X 36-INCHES) - 100 SHEETS |
|
|
OVERDRIVE AND BAIL KIT - INCLUDES LEFT AND RIGHT BAIL BRACKETS, 10 STARWHEEL MOU |
|
|
OVERDRIVE ROLLER - SHAFT WITH ROLLERS - RUNS THE WIDTH OF THE PLOTTER |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (FRENCH) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (GERMAN) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (ITALIAN) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (JAPANESE) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (KOREAN) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (SPANISH) |
|
|
OVERLAY AND HELP CARDS FOR FRONT PANEL (TAIWANESE) |
|
|
PAPER DRIVE (PLATEN) ROLLER ASSEMBLY - LONG GEAR DRIVEN ROLLER - INCLUDES ROLLER |
|
|
PINCH ARM BAR CAM (D-SIZE) - LONG ROD FROM LEFT TO RIGHT SIDE OF PRINTER - USED |
|
|
PINCHARM ASSEMBLY - CURVED BLACK PLASTIC PLATE WITH FOUR SMALL RUBBER ROLLERS - |
|
|
PINCHARM SENSOR - INCLUDES CABLE |
|
|
PINCHARM SPRING RETAINING BUSHING |
|
|
POLYESTER MATTE FILM - A1 SIZE (59.4CM X 84.1CM) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - A3 SIZE (29.7CM X 42.0CM) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - ARCHITECTURAL D SIZE (24 X 36-INCHES) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - B SIZE (11 X 17-INCHES) - 40 SHEETS |
|
|
POLYESTER MATTE FILM - D SIZE (22 X 34-INCHES) - 40 SHEETS |
|
|
POWER CORD (FLINT GRAY) - 18 AWG, 3-WIRE, 2.3M (7.5FT) LONG - HAS STRAIGHT (F) R |
|
|
POWER MODULE (WALL MOUNT) - INPUT VOLTAGE 100VAC, 47/63HZ - OUTPUT VOLTAGE 13VDC |
|
|
POWER MODULE (WALL MOUNT) - INPUT VOLTAGE 120VAC, 60HZ - OUTPUT VOLTAGE 12VDC, 1 |
|
|
POWER SUPPLY CABLE - HAS 12-PIN (F) CONNECTORS - 33CM (13IN) LONG |
|
|
RETAINING E-RING - 0.250-IN DIAMETER, STEEL ZINC-DICHROMATE DIP |
|
|
RETURN KIT WITH BOX AND INSTRUCTIONS - FOR RETURNING DEFECTIVE THERMAL INKJET (T |
|
|
RIBBON CABLE - 5-PIN (F) CONNECTOR TO 5-PIN (F) CONNECTOR - 40.3CM (15.9IN) LONG |
|
|
ROM - U28 ON MAIN LOGIC BOARD (REVISION B.02.01) |
|
|
ROM - U29 ON MAIN LOGIC BOARD (REVISION B.02.01) |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (F) - 1.2M (3.9FT) LONG |
|
|
RS-232C SERIAL CABLE - 25-PIN (M) TO 8-PIN (M) DIN - 1.5M (4.9FT) LONG |
|
|
SAFETY LABEL - PROVIDES WARNING THAT ENCODER STRIP IS SHARP |
|
|
SELF PACED TRAINING KIT FOR DESIGNJET PLOTTERS - INCLUDES SERVICE MANUAL, NTSC F |
|
|
SENSOR - FOR LIFT-UP VIEW WINDOW |
|
|
SENSOR MECHANISM - DOES NOT INCLUDE THE MEDIA SENSOR ASSEMBLY |
|
|
SERVICE STATION COVER |
|
|
SERVICE STATION HOUSING - THE BASE OF THE SERVICE STATION ASSEMBLY |
|
|
SPLIT FERRITE - INSTALLED INSIDE ELECTRONICS ENCLOSURE |
|
|
STARWHEEL MOUNT ASSEMBLY - INCLUDES COVER, BODY, SPRING AND TWO STARWHEELS |
|
|
STEPPER MOTOR |
|
|
TENSIONER HOUSING - HOLDS THE TENSIONER WEDGE AND TENSIONER SPRING FOR THE CARRI |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4 |
|
|
TRAILING CABLE FRONT GUIDE (TRAY) |
|
|
TUBEAXIAL FAN (MATSUSHITA FBK-09A12M2-MOD) - 82.5MM (3.25IN) MOUNT HOLE SPACING, |
|
|
WIPER ASSEMBLY - INCLUDES WIPER ROCKER, WIPER ROD AND WIPER PAD |
|
|
WIPER PAD |
|
|
Y-TENSIONER BRACKET ON LEFT SIDE PLATE |