Manufacturer
HP
Model Number
C4120A
Description
Laserjet 4000n
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
16MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
16MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
250/500 SHEET FEEDER CONNECTOR |
|
|
2MB FLASH DIMM MEMORY - FONT STORAGE DEVICE |
|
|
3.5GB EIO HARD DRIVE - LASERJET EIO FONT/PRINT JOB STORAGE |
|
|
4MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
500 SHEET PAPER PICKUP DRIVE ASSEMBLY |
|
|
500 SHEET TRAY - LETTER/LEGAL/A4 SIZES - PAPER CASSETTE |
|
|
500 SHEET UNIVERSAL PAPER TRAY ASSEMBLY - THIS IS ONLY THE TRAY THAT HOLDS THE P |
|
|
500-SHEET PAPER FEEDER AND TRAY/CASSETTE - THIS IS THE FRAME AND TRAY THAT THE P |
|
|
500-SHEET PAPER FEEDER AND TRAY/CASSETTE - THIS IS THE FRAME AND TRAY THAT THE P |
|
|
500-SHEET TRAY/CASSETTE - THIS IS ONLY THE TRAY, DOES NOT INCLUDE FEEDER OR FRAM |
|
|
8MB SIMPLIFIED CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB TRADITIONAL CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
8MB, 100MHZ SDRAM DIMM MEMORY MODULE |
|
|
AC POWER RECEPTACLE - CONNECTOR AND HOUSING ASSEMBLY |
|
|
ADDITIONAL SELF-PACED TRAINING GUIDES (ENGLISH) - PACK OF 5 |
|
|
ADJUSTABLE PAPER LENGTH STOP PLATE |
|
|
ARM LIFTER - WHITE PLASTIC ARM THAT HOLDS TOP LEFT SIDE METAL CORNER PIECE UP WH |
|
|
ARM LIFTER - WHITE PLASTIC ARM THAT HOLDS TOP RIGHT SIDE METAL CORNER PIECE UP W |
|
|
BELT DRIVE SHAFT |
|
|
BLACK TONER (EP) CARTRIDGE - WITH 'MICRO-FINE' TONER - HAS MAXIMUM CAPACITY TONE |
|
|
BLACK TONER (EP) CARTRIDGE - WITH 'MICRO-FINE' TONER - HAS STANDARD CAPACITY TON |
|
|
BOTTOM CABLE GUIDE |
|
|
CABLE ASSEMBLY - A 38-PIN (F) CONNECTOR TO A 14CM (5.5IN) RIBBON CABLE WITH A 26 |
|
|
CABLE ASSEMBLY - A 6-PIN (F) CONNECTOR TO BOTH A 21.3CM (8.4IN) CABLE WITH A 3-P |
|
|
CABLE ASSEMBLY - LARGE 6-PIN (F) CONNECTOR TO BOTH A 6.5CM (2.6IN) GROUNDING CAB |
|
|
CABLE ASSEMBLY WITH FERRITE - A 13-PIN (F) CONNECTOR, A 6-PIN (F) CONNECTOR, A 4 |
|
|
CABLE HOLDER |
|
|
COMPRESSION SPRING FOR TRAY IDENTIFIER PLUNGER |
|
|
CONTROL PANEL - DOES NOT INCLUDE OVERLAY |
|
|
CONTROL PANEL GROUND PLATE - METAL CLIP THAT PROVIDES THE GROUND CONNECTION FOR |
|
|
COUPLER GEAR |
|
|
COUPLER GEAR MOUNTING PLATE |
|
|
COUPLER KIT - CONTAINS PICKUP ROLLER COUPLER, FOUR PAPER TRAY LOAD LIMIT CLIPS A |
|
|
COVER PLATE - METAL BOTTOM PLATE THAT ATTACHES TO THE ENGINE CONTROLLER PC BOARD |
|
|
DELIVERY DRIVE ASSEMBLY |
|
|
DUPLEXER ASSEMBLY - FOR TWO SIDED PRINTING |
|
|
DUPLEXER REAR COVER PANEL |
|
|
DUST COVER - FOR USE WITH MODELS FEATURING A STANDARD 1X500 PAPER TRAY |
|
|
DUST COVER - FOR USE WITH MODELS FEATURING STANDARD 2X250 PAPER TRAYS |
|
|
DUST COVER - FOR USE WITH OPTIONAL 500-SHEET FEEDER ON LJ4000/4050/4100 MODELS U |
|
|
DUST COVER - FOR USE WITH OPTIONAL 500-SHEET FEEDER ON LJ4000/4050/4100 MODELS U |
|
|
DUST COVER - USED ON MODELS WITH STANDARD 1X500 PAPER TRAY |
|
|
DUST COVER - USED ON MODELS WITH STANDARD 2X250 PAPER TRAYS |
|
|
E-RING CLIP |
|
|
EIO SLOT COVER - INSTALLS ON FORMATTER BOARDS WITHOUT JETDIRECT PCA |
|
|
ENGINE CONTROLLER BOARD - PROVIDES ALL POWER SUPPLY AND MOTOR CONTROL FUNCTIONS, |
|
|
ENGINE TEST BUTTON - MANUAL TEST BUTTON |
|
|
ENVELOPE FEEDER CONNECTOR AND CABLE |
|
|
ENVELOPE FEEDER DRIVE COVER |
|
|
ENVELOPE FEEDER INPUT TRAY |
|
|
ENVELOPE WEIGHT |
|
|
ETHERNET 10BASE-T/10BASE2 AND LOCALTALK (RJ-45, BNC, LOCALTALK) EIO NETWORK PCA |
|
|
FEED DRIVE ASSEMBLY CONNECTOR |
|
|
FEED GUIDE DRIVE BELT - SMALL BELT APPROXIMATELY 5/16 INCH WIDE WITH 'A' SHAPED |
|
|
FEED MODULE SCREW - M3 X 16MM |
|
|
FEED/REGISTRATION SENSOR ASSEMBLY CABLE |
|
|
FEEDER CONTROLLER BOARD - PAPER SIZE DETECTION |
|
|
FEEDER COVER LEFT SIDE - TRAY 2 |
|
|
FORMATTER BOARD COVER PANEL |
|
|
FORMATTER/CONTROL PANEL CABLE GUIDE |
|
|
FUSING ASSEMBLY - FOR 110 VAC OPERATION - BONDS TONER TO THE PAPER BY HEAT |
|
|
FUSING ASSEMBLY - FOR 220 VAC - BONDS TONER TO PAPER WITH HEAT |
|
|
FUSING ASSEMBLY - FOR 220 VAC OPERATION - BONDS TONER TO PAPER BY HEAT |
|
|
FUSING ASSEMBLY PRESSURE ROLLER |
|
|
FUSING ROLLER - HEATING ELEMENT AND FILM SLEEVE - 110V |
|
|
GEAR ASSEMBLY PLATE CABLE GUIDE |
|
|
GEAR PLATE GROUND STRAP |
|
|
HP JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BO |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
INTERFACE CABLE KIT - FOR HP PERIPHERALS DESIGNED FOR USE IN AN APPLETALK/PHONEN |
|
|
INTERLOCK SWITCH SUPPORT GROUND STRAP |
|
|
JETDIRECT 600N TOKEN RING LAN INTERFACE BOARD - DB-9 AND RJ-45 CONNECTORS |
|
|
JETDIRECT 615N INTERNAL PRINT SERVER (10BASE-T AND 100BASE-TX) LAN INTERFACE BOA |
|
|
JETDIRECT CONNECTIVITY CARD - HAS ONE USB PORT, ONE SERIAL (DB9) PORT, AND ONE L |
|
|
LASER SHUTTER SPRING - PROVIDES TENSION FOR LASER SHUTTER |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (ARABIC) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (CZECHOSLOVAKIAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (DANISH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (DUTCH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (ENGLISH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (FINNISH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (FRENCH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (GERMAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (GREEK) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (HEBREW) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (HUNGARIAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (ITALIAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (JAPANESE) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (KOREAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (NORWEGIAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (POLISH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (RUSSIAN) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (SIMPLIFIED CHINESE) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (SWEDISH) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (THAILAND) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (TRADITIONAL CHINESE) |
|
|
LASERJET 4000 CONTROL PANEL OVERLAY (TURKISH) |
|
|
LASERJET 4000 SERIES MAINTENANCE KIT (120V) - INCLUDES (NEW) 120VAC FUSING ASSEM |
|
|
LASERJET 4000 SERIES SERVICE MANUAL |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LASERJET 4000/4050 SERIES MANUAL BUNDLE - INCLUDES USER'S MANUAL, 'GETTING START |
|
|
LEAF SPRING |
|
|
LEFT DUPLEX ACCESS PANEL - COVERS THE LEFT DUPLEXER MOUNT |
|
|
LEFT SIDE COVER ASSEMBLY - INCLUDES PANEL RETAINER CLIP |
|
|
LEFT SIDE DUPLEXER COVER - WITH CONNECTOR |
|
|
LEFT SIDE FRAME ASSEMBLY |
|
|
LEFT SIDE FRAME LEAF SPRING |
|
|
LEFT SIDE PANEL RETAINER CLIP |
|
|
LEVEL INDICATOR - SMALL OVAL BUTTON ON FRONT LEFT SIDE OF TRAY - MOVES VERTICALL |
|
|
LOWER BASE PLATE - BOTTOM PLATE OF 500 SHEET FEEDER |
|
|
LOWER TRAY CONNECTOR AND CABLE |
|
|
LOWER TRAY LOGIC PCA - WITH TRAY SIZE SWITCHES |
|
|
MAIN COOLING FAN |
|
|
MAIN COOLING FAN COVER |
|
|
MAIN MOTOR CABLE |
|
|
MAINTENANCE KIT (120V) - INCLUDES EXCHANGE 120VAC FUSING ASSEMBLY, TRANSFER ROLL |
|
|
MAINTENANCE KIT (220V) - INCLUDES (NEW) 220VAC FUSING ASSEMBLY, TRANSFER ROLLER, |
|
|
MAINTENANCE KIT - FOR 220 VAC OPERATION - INCLUDES 220 VAC FUSING ASSEMBLY, TRAN |
|
|
MODULE ATTACHMENT SCREW - LONG SCREW WITH SHOULDER AT BOTTOM |
|
|
OPTICAL SENSOR CABLE |
|
|
OPTIONAL 500 SHEET PAPER PICKUP DRIVE ASSEMBLY |
|
|
OPTIONAL LOWER CASSETTE SUPPORT GUIDE |
|
|
OUTPUT BIN (EXIT TRAY) - HOLDS THE FOLDED PAPER OUTPUT - CAN BE ADJUSTED FOR LEG |
|
|
PAPER FEED ASSEMBLY |
|
|
PAPER FEEDER CABLE |
|
|
PAPER FEEDER MODULE CABLE |
|
|
PAPER INPUT TRAY (TRAY 1) - MULTI-PURPOSE TRAY ASSEMBLY |
|
|
PAPER PICKUP ROLLER (D-SHAPED) - SOLD INDIVIDUALLY |
|
|
PAPER STOP SPRING - PROVIDES TENSION FOR TRAY PLATE STOP |
|
|
PICKUP ROLLER ASSEMBLY |
|
|
PICKUP ROLLER SPRING HOOK |
|
|
PLATE COVER |
|
|
POWER CORD (FLINT GRAY) - 2.3M (7.5FT) LONG - HAS 90 DEGREE (F) RECEPTACLE (FOR |
|
|
POWER SUPPLY MODULE - 100-240VAC INPUT, 50-60HZ - 24VDC OUTPUT, 2.7A, 65 WATTS - |
|
|
POWER SWITCH ACTUATOR ROD |
|
|
POWER SWITCH BUTTON |
|
|
PRE-TRANSFER GROUND PLATE ASSEMBLY |
|
|
REAR FUSER COVER PANEL |
|
|
REAR OUTPUT TRAY - DROP DOWN RELEASE LATCH |
|
|
REAR TRAY LATCH RELEASE SPRING |
|
|
REGISTRATION ASSEMBLY |
|
|
REGISTRATION ASSEMBLY GROUNDING PLATE |
|
|
REVERSIBLE BASE ASSEMBLY - USED IN THE LOWER POSITION WHEN ONE 500-SHEET TRAY IS |
|
|
RIGHT FRONT COVER ASSEMBLY - MOUNTS BEDIE THE FORMATTER PANEL |
|
|
RIGHT SIDE DUPLEXER COVER |
|
|
RIGHT SIDE FEEDER COVER |
|
|
RIGHT SIDE FRAME ASSEMBLY |
|
|
RIGHT SIDE PANEL RETAINER CLIP |
|
|
RIGHT SIDE TOP COVER SUPPORT ASSEMBLY |
|
|
RS-232C SERIAL CABLE - 9-PIN (M) TO 25-PIN (F) - 3.0M (9.8FT) LONG |
|
|
RUBBER FOOT - REPLACEMENT RUBBER FOOT FOR THE BOTTOM OF THE PRINTER (FOUR USED) |
|
|
SELF PACED TRAINING KIT FOR LASER JET 4000 FAMILY - INCLUDES NTSC FORMAT VIDEO ( |
|
|
SELF-PACED TRAINING KIT FOR LASERJET 4000 - INCLUDES NTSC VIDEO, SERVICE MANUAL |
|
|
SEPARATION ROLLER ACCESS PANEL |
|
|
SEPARATION ROLLER BUSHING |
|
|
SEPARATION ROLLER CLUTCH - TORQUE LIMITER |
|
|
SEPARATION ROLLER MOUNTING ASSEMBLY |
|
|
SEPARATION ROLLER/GEAR COUPLER |
|
|
SERIAL CABLE ADAPTER - 9-PIN (M) TO 25-PIN (F) |
|
|
SHEET INSULATOR - PLASTIC SHEET BETWEEN PCA AND METAL PLATE |
|
|
TONER CARTRIDGE DRIVE ROD |
|
|
TONER CARTRIDGE DRUM GROUND SPRING |
|
|
TONER CARTRIDGE SENSING SPRING |
|
|
TONER CARTRIDGE SENSING SPRING RETAINER |
|
|
TONER CLEANING CLOTH - SPECIALLY TREATED CLOTH FOR ABSORBING TONER (1 PER PACKAG |
|
|
TOP COVER - DUPLEXER ACCESS TOP COVER |
|
|
TOP COVER INTERLOCK ACCESS SWITCH |
|
|
TRANSFER ROLLER ASSEMBLY - LONG METAL SHAFT WITH BLACK ROLLER AND DRIVE GEAR - T |
|
|
TRANSPORT ROLLER BEARING |
|
|
TRAY 1 PAPER PICKUP ASSEMBLY - COMPLETE ASSEMBLY INCLUDING PICKUP ROLLER, SEPARA |
|
|
TRAY 1 PAPER SENSOR ACTUATOR ARM AND COVER |
|
|
TRAY 1 PICKUP ROLLER ASSEMBLY - D-SHAPED ROLLER WITH BLUE SHAFT LOCK LATCH |
|
|
TRAY 1 RETAINING ARM |
|
|
TRAY IDENTIFIER PLUNGER - IDENTIFIES TRAY NUMBER INSTALLED |
|
|
TRAY LOCK SPRING |
|
|
TRAY PAPER STOP - LOCKS PAPER LENGTH PLATE IN SLOT |
|
|
TRAY SIZE SENSING LEVER ASSEMBLY |