Manufacturer
HP
Model Number
C4230A
Description
Mopier 320
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
16MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
16MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
2.1GB HARD DRIVE - LASERJET EIO FONT/PRINT JOB STORAGE |
|
|
2000 SHEET PAPER TRAY CASSETTE SIZE LABEL |
|
|
2000 SHEET PAPER TRAY PAPER PICKUP ASSEMBLY - NOT COMPATIBLE WITH C3763A AND C37 |
|
|
2000 SHEET PAPER TRAY RIGHT SIDE COVER |
|
|
2MB FLASH DIMM MEMORY - FONT STORAGE DEVICE |
|
|
3.5GB EIO HARD DRIVE - LASERJET EIO FONT/PRINT JOB STORAGE |
|
|
4MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
5-BIN MAIL BOX WITH STAPLER - HOLDS 2100 SHEETS OF PAPER USED WITH 5SI FAMILY, M |
|
|
7-BIN TABLE TOP MAILBOX - WHOLE UNIT |
|
|
7-BIN TABLETOP MAILBOX STAND - WHEELED STAND THAT ALLOWS 7-BIN TABLETOP MAILBOX |
|
|
8MB SIMPLIFIED CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB TRADITIONAL CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB, 100-PIN, 32-BIT, 60NS, EDO DRAM DIMM MEMORY MODULE |
|
|
8MB, 100MHZ SDRAM DIMM MEMORY MODULE |
|
|
AC ACCESS COVER - HAS CUT OUT FOR A/C POWER CORD CONNECTION |
|
|
AC POWER BOX - HOLDS AC RECPTACLE, FUSE HOLDER, AND FOUR CABLE CONNECTIONS - INC |
|
|
ACCESS DOOR STRUTS - ATTACHED TO EACH SIDE OF DIVERTER DOOR ASSEMBLY |
|
|
ADF BELT - DRIVES AUTOMATIC DOCUMENT FEEDER ROLLERS |
|
|
ADF COVER - AUTOMATIC DOCUMENT FEEDER TOP COVER |
|
|
ADF LATCH SPRING - HOLDS TENSION ON ADF RELEASE LATCH |
|
|
ADF MOTOR UNIT - DRIVES ADF ROLLERS |
|
|
ADF OUTPUT TRAY EXTENDER - FLIP-OUT TRAY EXTENDER |
|
|
ADF UNIT LAMP PCA |
|
|
ADJUSTABLE FOOT - THREADED ATTACHMENT FOR LEVELING |
|
|
ATTACHMENT KIT - ATTACHMENT ROD, BRACKET AND CABLES |
|
|
AUTOMATIC DOCUMENT FEEDER ASSEMBLY |
|
|
BACK BOARD - CONNECTS CONTROL PCA AND COPY PROCESSOR PCA |
|
|
BACK COVER - PROTECTS BACK OF TRAY ASSEMBLY |
|
|
BACK COVER - PROTECTS BACK OF TRAY ASSEMBLY |
|
|
BIN FULL AND INTERLOCK SENSOR BOARD |
|
|
BIN FULL SENSOR ARM |
|
|
BLACK ULTRA-PRECISE TONER CARTRIDGE |
|
|
BLACK ULTRA-PRECISE TONER CARTRIDGE |
|
|
BLIND COVER - COVERS SPACE TRAYS AND FACE-UP BIN - HOME POSITION COVER FOR HEAD |
|
|
BOTTOM BIN TRAY |
|
|
C-LINK CABLE ADAPTER EXTENSION - USED WHEN NO INPUT DEVICE IS USED WITH 8-BIN OR |
|
|
CABINET STABILIZER (OUTRIGGER) - WITH ADJUSTABLE FOOT |
|
|
CABLE ASSEMBLY - 18-PIN (F) CONNECTOR TO 25.4CM (10IN) GROUNDING WIRE WITH RING |
|
|
CABLE ASSEMBLY - 20-PIN (F) CONNECTOR ON EACH END - 39.4CM (15.5IN) LONG |
|
|
CABLE ASSEMBLY - AN 11-PIN (F) CONNECTOR, A 10-PIN (F) CONNECTOR, AND TWO 7-PIN |
|
|
CABLE ASSEMBLY - FROM DC CONTROLLER BOARD TO MAIN MOTOR |
|
|
CABLE ASSEMBLY WITH FERRITES - HAS MANY CONNECTORS: A 14-PIN (F), AN 11-PIN (F), |
|
|
CABLE KIT - INCLUDES INTERLOCK SWITCH, HEAD MOTOR CABLE, FLIPPER SENSOR, ENCODER |
|
|
CARRIER FLEX CABLE - FROM CARRIER UNIT TO JUNCTION PCA |
|
|
CARRIER RAIL - CARRIER UNIT FRONT SUPPORT RAIL |
|
|
CARRIER SPRING - PROVIDES TENSION FOR CARRIER BELT PULLEY |
|
|
CARRIER TENSION PULLEY - CARRIER BELT IDLER PULLEY |
|
|
CARRIER TENSION PULLEY COLLAR - SLEEVE THAT CARRIER PULLEY TENSION SPRING SLIDES |
|
|
CARRIER TENSION PULLEY SHAFT |
|
|
CARRIER TENSION PULLEY SPACER |
|
|
CARRIER UNIT ASSEMBLY - HOLDS OPTICAL SCANNER FOR FLATBED SCANNER PORTION OF COP |
|
|
CARRIER UNIT DUST COVER |
|
|
CARRIER UNIT LAMP PCA |
|
|
CARRIER UNIT MOTOR |
|
|
CASSETTE SIZE SENSOR CABLE - BETWEEN CASSETTE SIZE SENSOR PCA'S AND FORMATTER BO |
|
|
CASTER WHEEL |
|
|
CCD CABLE - FROM CONTROL PCA TO CCD PCA ON OPTICAL UNIT |
|
|
CG STOPPER - TONER CARTRIDGE GUIDE STOP - HOLDS TONER CARTRIDGE IN PLACE |
|
|
CHASSIS FOOT - SUPPORT FOR RIGHT SIDE OF PRINTER CHASSIS - TWO USED |
|
|
CLUTCH COVER - PAPER FEED CLUTCH COVER |
|
|
CLUTCH COVER FOR 2000 SHEET INPUT TRAY |
|
|
COMPRESSION SPRING - CENTER SUPPORT FOR LEFT OUTPUT BIN |
|
|
COMPRESSION SPRING - HOLDS TENSION ON FRONT SUPPORT BLOCK |
|
|
COMPRESSION SPRING - HOLDS TENSION ON REAR SUPPORT BLOCK |
|
|
CONTROL PANEL COVER |
|
|
CONTROL PCA - CONTROLS ELECTRO-MECHANICAL AND OPTICAL FUNCTIONS OF THE COPIER EN |
|
|
CONTROLLER BOARD - 7-BIN TABLETOP MAILBOX CONTROLLER PCA |
|
|
CONTROLLER PCA - 2 X 500-SHEET INPUT TRAY CONTROLLER PCA |
|
|
COPY PROCESSOR PCA - CONTROLS CONNECTION BETWEEN COPIER AND PRINTER - ALSO CONTR |
|
|
DAISY CHAIN' POWER CORD - 18 AWG - HAS C14 (M) PLUG FOR POWER INPUT AND C13 (F) |
|
|
DAISY CHAIN' POWER CORD - HAS (M) C14 PLUG FOR POWER INPUT AND (F) C13 PLUG FOR |
|
|
DAMPER HOLDER - FRONT DAMPER HOLDER |
|
|
DAMPER HOLDER - REAR DAMPER HOLDER |
|
|
DC CABLE - FROM POWER SUPPLY TO COPIER LOGIC BOARD |
|
|
DIAGNOSTIC LED DISPLAY BOARD - WITH CABLE |
|
|
DIVERTER ASSEMBLY - DIVERTS PAPER TO DUPLEXER ASSEMBLY OR FACE UP TRAY OR FACE D |
|
|
DIVERTER ASSEMBLY - FLIPPER |
|
|
DIVERTER DOOR ASSEMBLY - UPPER DOOR ON LEFT SIDE OF PRINTER - TWO STRUTS ARE MOU |
|
|
DOCUMENT COVER RUBBER STOP |
|
|
DOCUMENT HOLDING PAD - FOAM PIECE ON BOTTOM OF FLATBED COVER THAT HOLDS DOCUMENT |
|
|
DRIVE ROLLER BEARING - FRONT DRIVE ROLLER BEARING |
|
|
DRIVE ROLLER BEARING - REAR DRIVE ROLLER BEARING |
|
|
DRIVE ROLLER GEAR |
|
|
DRIVE ROLLER SHAFT - TWO USED |
|
|
DUPLEXER CABLE ASSEMBLY - FROM DUPLEXER TO DC CONTROLLER |
|
|
EIO SLOT COVER - INSTALLS ON FORMATTER BOARDS WITHOUT JETDIRECT PCA |
|
|
ELEVATOR STEPPER MOTOR - MOVES THE DELIVERY HEAD ASSEMBLY INTO POSITION |
|
|
EMAIL LICENSE CERTIFICATE FOR MFP |
|
|
ETHERNET 10BASE-T/10BASE2 AND LOCALTALK (RJ-45, BNC, LOCALTALK) EIO NETWORK PCA |
|
|
EXIT IDLE ROLLER |
|
|
FACE DOWN BIN ASSEMBLY - ONE ROLLER |
|
|
FACE DOWN BIN ASSEMBLY - TWO ROLLERS |
|
|
FACE DOWN DELIVERY ASSEMBLY - FEEDS PAPER TO TOP OF PRINTER |
|
|
FACE UP SOLENOID ASSEMBLY |
|
|
FACE-DOWN OUTPUT TRAY - AT TOP OF PRINTER |
|
|
FACE-UP BIN FULL & SENSOR PCA |
|
|
FACE-UP OUTPUT TRAY - AT UPPER LEFT SIDE |
|
|
FACE-UP PAPER OUTPUT BIN |
|
|
FAN CABLE - FAN 3 POWER CABLE |
|
|
FAX LICENSE CERTIFICATE FOR MFP |
|
|
FEED/SEPARATION ROLLER - HAS A BLUE GEAR ON ONE END AND BLUE RELEASE TAB ON THE |
|
|
FEEDER ASSEMBLY - TRANSFER ROLLER AND REGISTRATION ASSEMBLY ARE MOUNTED ON THIS |
|
|
FERRITE CORE - ATTACHES TO THE CARRIER RIBBON CABLE |
|
|
FIXED CASTER - ADJUSTABLE HEIGHT CASTER |
|
|
FIXED CASTER - NON-ADJUSTABLE HEIGHT CASTER |
|
|
FLATBED COVER ASSEMBLY - WITH PAPER CHUTER FLIP OUT AND DOCUMENT HOLDING PAD |
|
|
FLIPPER ASSEMBLY (WITH CABLE) - MOVES PAPER FROM PRINTER TO FACE DOWN MAILBOX TR |
|
|
FLIPPER SOLENOID |
|
|
FORMATTER BOARD EMI SHIELD |
|
|
FRAME GROUND SPRING |
|
|
FRONT ACCESS DOOR - DUPLEXER JAM REMOVAL ACCESS DOOR |
|
|
FRONT ADF LIFT SPRING |
|
|
FRONT BRACKET - FRONT PANEL SUPPORT BRACKET |
|
|
FRONT CONTROL PANEL ASSEMBLY - LCD TOUCH SCREEN AND COMPLETE CONTROL BUTTON PANE |
|
|
FRONT COVER - CONTAINS LED STATUS DISPLAY WINDOW |
|
|
FRONT COVER - COVER WITH RELEASE LATCH HANDLE |
|
|
FRONT COVER - FRONT ACCESS DOOR MOUNTS TO THIS COVER |
|
|
FRONT COVER - FRONT SIDE COVER |
|
|
FRONT LED PCA - LED STATUS DISPLAY BOARD |
|
|
FRONT PANEL CABLE - BETWEEN FRONT PANEL AND JUNCTION PCA |
|
|
FRONT PANEL CABLE COVER - PROTECTS FRONT PANEL CABLE |
|
|
FRONT PAPER REFERENCE PLATE - FRONT PAPER LIMIT PLATE FOR 2,000-SHEET FEEDER |
|
|
FRONT TOP COVER - COVER WHERE THE 'STATUS' LED IS LOCATED |
|
|
FUSING ASSEMBLY - FOR 100 VAC TO 120 VAC OPERATION - BONDS TONER TO PAPER WITH H |
|
|
FUSING ASSEMBLY - FOR 220 VAC TO 240 VAC OPERATION - BONDS TONER TO PAPER WITH H |
|
|
GLASS PLATE ASSEMBLY - COPIER FLATBED GLASS, FRAME AND LOWER ADF EXIT ROLLER ASS |
|
|
GROUND SPRING - FRONT PANEL FRAME GROUND SPRING |
|
|
HEAD ASSEMBLY - MOVES PAPER UP AND DOWN THE MAILBOX TO THE CORRECT MAILBOX BIN |
|
|
HIGH VOLTAGE POWER SUPPLY ASSEMBLY |
|
|
HINGE PLATE - BOTTOM HALF OF TOP COVER HINGE |
|
|
HOLDER SIZE PCA |
|
|
HOME POSTION SENSOR - SENSES WHEN CARRIER UNIT IS PARKED IN THE HOME POSITION |
|
|
HP JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BO |
|
|
HP LASERJET 8000 AND 8100 SERIES OPTIONAL 1000 (2 X 500) SHEET PAPER TRAYS (TRAY |
|
|
HP LASERJET 8000, 8100, AND 5SI SERIES OPTIONAL 2000 SHEET PAPER TRAY (TRAY 4) - |
|
|
HP LASERJET PRINTER CABINET - FOR LASERJET 5SI FAMILY AND 8000/8100 SERIES PRINT |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5 |
|
|
HP-GL/2, PCL5 AND PJL TECHNICAL REFERENCE MANUAL KIT |
|
|
IDLE ROLLER COIL SPRING - PROVIDES TENSION FOR IDLE ROLLER |
|
|
IEEE 1284 BI-TRONICS PARALLEL CABLE - DB-25 (M) CONNECTOR (TYPE A) TO 36-PIN HIG |
|
|
IEEE 1284 BI-TRONICS PARALLEL CABLE - DB-25 (M) CONNECTOR (TYPE A) TO 36-PIN HIG |
|
|
INTERFACE CABLE KIT - FOR HP PERIPHERALS DESIGNED FOR USE IN AN APPLETALK/PHONEN |
|
|
INTERNAL COVER FOR TRAY 1 PICKUP ASSEMBLY |
|
|
JETDIRECT 600N INTERNAL PRINT SERVER (10BASE-T AND 100BASE-TX) LAN INTERFACE BOA |
|
|
JETDIRECT 600N TOKEN RING LAN INTERFACE BOARD - DB-9 AND RJ-45 CONNECTORS |
|
|
JETDIRECT 610N INTERNAL PRINT SERVER (10BASE-T AND 100BASE-TX) LAN INTERFACE BOA |
|
|
JETDIRECT 615N INTERNAL PRINT SERVER (10BASE-T AND 100BASE-TX) LAN INTERFACE BOA |
|
|
JUNCTION PCA - PC BOARD THAT CONNECTS FRONT PANEL, CARRIER UNIT, FLAT BED MOTOR |
|
|
JUNCTION PCA COVER - PROTECTS JUNCTION PCA |
|
|
KEY WASHER |
|
|
LASER/SCANNER ASSEMBLY |
|
|
LASERJET 8100 CONTROL PANEL OVERLAY (ENGLISH) |
|
|
LASERJET 8100 CONTROL PANEL OVERLAY (ITALIAN) |
|
|
LASERJET 8100 CONTROL PANEL OVERLAY (SPANISH) |
|
|
LASERJET 8100 SERIES MAINTENANCE KIT (120V) - REPLACEMENT PARTS AFTER 350K PAGES |
|
|
LASERJET 8100 SERIES USER GUIDE - 23 LANGUAGES |
|
|
LASERJET 8100 SERVICE MANUAL BUNDLE - INCLUDES SERVICE MANUAL SUPPLEMENT FOR PAP |
|
|
LASERJET PRINTER FILE FOLDER LABELS - 1.69CM (0.67IN) X 8.73CM (3.44IN) LABELS - |
|
|
LASERJET PRINTER FULL SHEET LABEL - A SIZE (8.5 X 11-INCHES) LABEL - ONE PER SH |
|
|
LASERJET PRINTER LABELS FOR 3.5-INCH DISKETTES - 7.00CM (2.75IN) X 7.00CM (2.75I |
|
|
LASERJET PRINTER LABELS FOR 5.25-INCH DISKETTES - 3.81CM (1.50IN) X 10.2CM (4.00 |
|
|
LASERJET PRINTER RETURN ADDRESS LABELS - 1.27CM (0.50IN) X 4.45CM (1.75IN) LABEL |
|
|
LASERJET PRINTER SHIPPING LABELS - 8.47CM (3.33IN) X 10.2CM (4.00IN) LABELS - SI |
|
|
LASERJET PRINTER TRANSPARENCY FILM - A4 SIZE (21.0CM X 29.7CM) - 50 SHEETS |
|
|
LATCH CAP - ADF COVER LATCH CAP |
|
|
LATCH PLATE |
|
|
LATCH SPACER - BLACK PLASTIC PIECE THAT LATCH ENGAGES |
|
|
LEAF SPRING - IDLE ROLLER LEAF SPRING |
|
|
LEAF SPRING - RETAINING SPRING |
|
|
LED ASSEMBLY - STATUS DISPLAY WITH CABLE - GREEN LED THAT INDICATES WHEN PAPER I |
|
|
LED DISPLAY - STATUS DISPLAY WITH HOLDER AND CABLE |
|
|
LED PCA - STATUS PANEL LED DISPLAY BOARD |
|
|
LEFT COVER - LEFT SIDE CABINET COVER |
|
|
LEFT FUSING ASSEMBLY LOCK - LOCKS FUSER IN PLACE |
|
|
LOW VOLTAGE POWER SUPPLY - 240VAC, 50HZ - INCLUDES POWER SWITCH, AC RECEPTACLE A |
|
|
LOW VOLTAGE POWER SUPPLY - FOR 120 VAC - INCLUDES POWER SWITCH, AC RECEPTACLE AN |
|
|
LOWER LAMP - FRONT SIDE OF CARRIER UNIT |
|
|
LOWER LEFT COVER - MOUNTED BELOW DIVERTER DOOR ASSEMBLY |
|
|
LOWER PAPER INPUT TRAY (TRAY 3) - 500 SHEET CAPACITY - FOR LETTER, LEGAL, 11INCH |
|
|
LUBRICATION APPLICATOR - CARRIER UNIT RAIL LUBRICATOR |
|
|
MAILBOX CONTOLLER PCA |
|
|
MAIN CABLE - LARGEST CABLE IN C4781A |
|
|
MAIN CABLE ON INPUT ASSEMBLY |
|
|
MAIN DRIVE GEAR ASSEMBLY |
|
|
MAIN MOTOR |
|
|
MAINTENANCE KIT (220V) - REPLACEMENT PARTS AFTER 350K PAGES INCLUDES, FUSING ASS |
|
|
MAINTENANCE KIT - FOR 120 VAC - REPLACEMENT PARTS AFTER 350K PAGES - INCLUDES FU |
|
|
MAINTENANCE KIT - FOR 220 VAC - REPLACEMENT PARTS AFTER 350K PAGES - INCLUDES FU |
|
|
METALLIC TAPE AND HOUSING ASSEMBLY - GUIDES AND HOLDS THE PAPER AGAINST THE TRAN |
|
|
MOTOR COVER - REVERSING MECHANISM MOTOR COVER PLATE |
|
|
NT AUTHENTICATION CERTIFICATE FOR MFP |
|
|
OPERATION LABEL |
|
|
OPTICAL UNIT TIE DOWN/HOLD-DOWN BRACKET |
|
|
OPTIONAL ENVELOPE FEEDER - AUTOMATICALLY FEEDS 100 ENVELOPES |
|
|
OUTPUT BIN ROLLER BUSHING |
|
|
OUTPUT TRAY ASSEMBLY - ADF OUTPUT TRAY WITH FLIP-OUT PAPER SUPPORT TRAY EXTENDER |
|
|
OUTPUT TRAY BRACKET - FRONT ADF OUTPUT TRAY MOUNT |
|
|
OUTPUT TRAY BRACKET - REAR ADF OUTPUT TRAY MOUNT |
|
|
OUTRIGGER ADJUSTABLE FOOT - ADJUSTS UP AND DOWN |
|
|
PAD ASSEMBLY FRAME - SUPPORTS SEPARATION PAD ASSEMBLY |
|
|
PAPER ANTISTATIC BRUSH ASSEMBLY |
|
|
PAPER CASSETTE SIZE PLATE - SELF ADHESIVE LABEL NOT INCLUDED |
|
|
PAPER CHUTE FLIP OUT - FLIP OUT PAPER TRAY EXTENSION |
|
|
PAPER DECK DRIVE ASSEMBLY - GEAR ASSEMBLY THAT LIFTS THE PAPER PLATE TO THE PICK |
|
|
PAPER DECK PCA - INPUT TRAY CONTROLLER PCA |
|
|
PAPER EXIT GUIDE (WIRE-FORM) |
|
|
PAPER FEED ASSEMBLY - VERTICAL TRANSFER UNIT - TRANSFERS PAPER FROM PICK-UP ASSE |
|
|
PAPER FEED ASSEMBLY - VERTICAL TRANSFER UNIT - TRANSFERS PAPER FROM PICKUP ASSEM |
|
|
PAPER FEED CLUTCH |
|
|
PAPER GUIDE / PICK ROLLER COVER THUMBSCREW |
|
|
PAPER HEIGHT LEVER - SENSES WHEN FACE-DOWN TRAY IS FULL |
|
|
PAPER INPUT GUIDE |
|
|
PAPER INPUT MOTOR |
|
|
PAPER INPUT UNIT SENSOR ARM - SENSES WHEN PAPER PASSES THROUGH PAPER INPUT UNIT |
|
|
PAPER LENGTH STOP |
|
|
PAPER OUTPUT BIN |
|
|
PAPER PICK-UP ASSEMBLY - INCLUDES PICK-UP ROLLER, FEED AND SEPARATION ROLLERS |
|
|
PAPER PICKUP |
|
|
PAPER PICKUP ASSEMBLY |
|
|
PAPER PICKUP BOARD - INCLUDES 8 PHOTOSENSORS |
|
|
PAPER SENSOR CABLE - J11 TO J15 |
|
|
PAPER SIZE SENSOR BOARD - USED TO SENSE PAPER SIZE IN UPPER AND LOWER PAPER TRAY |
|
|
PAPER STORAGE TRAY - STORES UP TO TWENTY POUNDS OF PAPER |
|
|
PAPER STORAGE TRAY FRONT COVER |
|
|
PAPER TRAY TOP COVER - INCLUDES LABEL |
|
|
PAPER TRAY TOP COVER - INCLUDES LABEL |
|
|
PC BOARD COOLING FAN ASSEMBLY |
|
|
PCA GUIDE - FORMATTER BOARD SUPPORT GUIDES |
|
|
PHOTO SENSOR KIT - INCLUDES PHOTO SENSORS PS 1,3,5 AND 6 |
|
|
PICK ROLLER ASSEMBLY |
|
|
PICK ROLLER BRASS BUSHINGS - SUPPORTS PICKUP ROLLER |
|
|
PICK SPRING - PROVIDES PRESSURE FOR SEPARATION PAD |
|
|
PICKUP ROLLER - USED IN PAPER PICKUP ASSEMBLY - 2 USED |
|
|
PICKUP ROLLER - USED IN TRAY 1 PAPER PICKUP ASSEMBLY |
|
|
PICKUP ROLLER ASSEMBLY - HAS ATTACHED BLACK PLASTIC GEAR |
|
|
PICKUP ROLLER ASSEMBLY COVER |
|
|
PICKUP ROLLER CLUTCH/GEAR ASSEMBLY |
|
|
PLASTIC KIT - CONTAINS TWO SMALL BOTTOM PULLIES, FLAT CABLE HOLDER, THREE SMALL |
|
|
POSITIONING PIN |
|
|
POSITIONING PIN - METAL LOCATING PINS |
|
|
POWER CORD - POWER CORD FROM PRINTER TO SCANNER AND MAILBOX |
|
|
POWER SUPPLY ASSEMBLY |
|
|
POWER SUPPLY CABLE - BETWEEN POWER SUPPLY AND CONTROLLER PCA |
|
|
POWER SUPPLY FUSE, 250V MAX |
|
|
POWER SUPPLY KIT - FOR CONNECTING A MULTI-BIN MAILBOX TO PRINTER WHEN PRINTER IS |
|
|
POWER SUPPLY PCA FOR 7-BIN TABLETOP MAILBOX POWER SUPPLY |
|
|
POWER SWITCH COVER - HAS CUTOUT FOR POWER SWITCH |
|
|
RAIL BUSHING - CARRIER UNIT SUPPORT BUSHING |
|
|
REAR ADF LIFT SPRING |
|
|
REAR COVER - SHEET METAL |
|
|
REDUCTION CLUSTER GEAR |
|
|
REGISTRATION ASSEMBLY - SET OF ROLLERS BEFORE TONER CARTRIDGE AND AFTER FEED ROL |
|
|
REGISTRATION ASSEMBLY CLUTCH |
|
|
REGISTRATION CABLE ASSEMBLY - INCLUDES 7P AND 3P CONNECTORS |
|
|
REGISTRATION PAPER SENSOR ARM - SENSES PAPER IN REGISTRATION ASSEMBLY |
|
|
RELEASE ARM |
|
|
RELEASE ARM - TONER CARTRIDGE RELEASE ARM - HOOK SHAPED CARTRIDGE HOLDER |
|
|
RELEASE HANDLE - LATCH LEVER HANDLE |
|
|
RELEASE LATCH HANDLE COVER |
|
|
REPACKAGING KIT |
|
|
REPLACEMENT OPTIONAL ENVELOPE FEEDER - HOLDS 100 ENVELOPES |
|
|
RETAINER CLIP - KEEPS MULTIPURPOSE/TRAY 1 HINGE IN PLACE - BLACK PLASTIC CLIP FO |
|
|
RETAINER CLIP - KEEPS MULTIPURPOSE/TRAY1 HINGE IN PLACE - BLACK PLASTIC CLIP FOR |
|
|
RETAINER TAB |
|
|
REVERSING MECHANISM MOTOR |
|
|
REVERSING MECHANISM SOLENOID |
|
|
RFI COVER SHIELD FOR PC BOARDS |
|
|
RIGHT COVER - RIGHT SIDE COVER BELOW THE DIVERTER ASSEMBLY |
|
|
RIGHT DOOR ASSEMBLY - DOOR BELOW PAPER TRAY 1 - SUPPORT STRAP ATTACHED TO RIGHT |
|
|
RIGHT REAR COVER - ATTACHES TO THE SHEET METAL REAR COVER |
|
|
RIGHT SIDE CABINET COVER |
|
|
RIGHT SIDE TRAY RAIL |
|
|
ROD - TRAY CONNECTOR ROD FOR SPRINGS |
|
|
RUBBER FOOT - REPLACEMENT RUBBER FOOT FOR THE BOTTOM OF THE PRINTER (FOUR USED) |
|
|
SENSOR ARM - DETECTS LEADING EDGE OF ADF PAPER INPUT |
|
|
SENSOR ARM SPRING - HOLDS TENSION ON PAPER FEEDER SENSOR ARM |
|
|
SENSOR ARM TORSION SPRING - HOLDS TENSION ON PIU PAPER SENSOR ARM |
|
|
SENSOR ASSEMBLY - INCLUDES EIGHT SENSORS, SENSOR CABLE AND SENSOR MOUNT ASSEMBLY |
|
|
SENSOR CABLE - CONNECTS ADF SENSORS TO COPIER CONTROL BOARD |
|
|
SENSOR CABLE - PIU PS2 SENSOR CABLE - J13 TO J1205 |
|
|
SENSOR FLAG - OPTICAL SENSOR FOR BIN FULL SENSOR |
|
|
SENSOR PCA - EMPTY BIN SENSOR BOARD |
|
|
SENSOR PCA - PAPER QUANTITY SENSOR PCA |
|
|
SEPARATION PAD - TRAY 1 SEPARATION PAD |
|
|
SHAFT HOLDING BLOCK - FRONT REGISTRATION ROLLER SUPPORT |
|
|
SHAFT HOLDING BLOCK - REAR REGISTRATION ROLLER SUPPORT |
|
|
SHIPPING LOCK KIT - FOR 8-BIN AND 5-BIN MAILBOXES |
|
|
SIDE COVER - BACK SIDE COVER |
|
|
SLIDE GUIDE - GUIDE FOR FORMATTER PCA |
|
|
STAPLER UNIT C-LINK CABLE - HAS TWO HIGH DENSITY 15-PIN (M) CONNECTORS - 91.4CM |
|
|
STAPLING UNIT - INCLUDES TOP COVER, BED ASSEMBLY, AND BOARD |
|
|
STAPLING UNIT ANTISTATIC BRUSH - ELIMINATES STATIC CHARGE ON PAPER |
|
|
STAPLING UNIT BACK PLATE - COVERS REAR OF STAPLING UNIT |
|
|
STAPLING UNIT BED ASSEMBLY - INCLUDES SLIDERS THAT MOVE SHEETS OF PAPER TO STAPL |
|
|
STAPLING UNIT CONTROL BOARD |
|
|
STAPLING UNIT HINGES - SET OF 2 |
|
|
STAPLING UNIT TOP COVER |
|
|
STATUS LED DISPLAY - WITH CABLE |
|
|
STOPPER PLATE - LIMITS TRAVEL OF RIGHT COVER |
|
|
SUPPORT PLATE - SUPPORTS EMPTY BIN SENSOR PCA |
|
|
SUPPORT STRAP - SUPPORTS DOOR WHEN OPEN |
|
|
SWITCH/SENSOR BOARD PLATE - SHIELDS SWITCH/SENSOR PCA |
|
|
TENSION SPRING |
|
|
TENSION SPRING - FRONT SPRING ON METAL SLIDE |
|
|
TENSION SPRING - PROVIDES TENSION FOR LATCH HANDLE |
|
|
THERMAL SWITCH - FUSER ASSEMBLY THERMAL SWITCH LOCATED ON OPPOSITE SIDE OF GEAR |
|
|
TONER CARTRIDGE GUIDE - PLASTIC PIECE WITH SLOT TO GUIDE TONER CARTRIDGE |
|
|
TONER CARTRIDGE GUIDE - REAR GUIDE - PLASTIC PIECE WITH SLOT TO GUIDE TONER CART |
|
|
TONER CLEANING CLOTH - SPECIALLY TREATED CLOTH FOR ABSORBING TONER (1 PER PACKAG |
|
|
TOP COVER |
|
|
TOP COVER ASSEMBLY - DOES NOT INCLUDE FACE UP TRAY OR CONTROL PANEL DISPLAY |
|
|
TORSION SPRING - HELPS SUPPORT LEFT OUTPUT BIN TRAY |
|
|
TRANSFER ROLLER ASSEMBLY - INCLUDES TRANSFER ROLLER WITH ATTACHED GEAR ONLY |
|
|
TRANSPORT BELT MOTOR - INCLUDES FAN |
|
|
TRAY 4 ASSEMBLY - COMPLETE TRAY WITH IDENTIFICATION LABEL |
|
|
TRAY 5 ASSEMBLY - COMPLETE TRAY WITH IDENTIFICATION LABEL |
|
|
TRAY RAIL GUIDE (SPRING LOADED METAL GUIDE) |
|
|
TRAY SHIPPING LOCK CLIP - SECURES PAPER TRAY DURING SHIPPING |
|
|
TRAY STOP - RIGHT SIDE TRAY STOPPER - ATTACHED TO RIGHT REAR SIDE OF TRAY 2 AND |
|
|
TUBEAXIAL FAN |
|
|
TUBEAXIAL FAN |
|
|
TUBEAXIAL FAN |
|
|
UNIVERSAL POWER SUPPLY |
|
|
UPPER COVER - FRAME AROUND GLASS PLATE ASSEMBLY |
|
|
UPPER INPUT PAPER TRAY (TRAY 2) - 500 SHEET CAPACITY - FOR LETTER, LEGAL, AND A4 |
|
|
UPPER PAPER GUIDE PLATE |
|
|
UPPER RIGHT SIDE COVER - ABOVE DROP DOWN TRAY 1 |
|
|
UPPER SCANNER PORTION OF ADF UNIT - SCANS PAGE AS IT FEEDS THROUGH THE ADF - PRO |
|
|
V2 HK RING - SPECIAL APPLICATION SPACER |