Manufacturer
HP
Model Number
C6450A
Description
Deskjet 610c
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
ADVANCED GLOSSY PHOTO PAPER - A SIZE (8.5 X 11-INCHES) - 25 SHEETS |
|
|
BASE ASSEMBLY - METAL BASE OF PRINTER (INCLUDES TABS FOR ESD CLIPS) |
|
|
BELT SPRING - FOR BELT TENSION BRACKET |
|
|
BELT TENSION BRACKET - PIVOT BRACKET FOR IDLER PULLEY - APPLIES TENSION TO THE C |
|
|
BRIGHT WHITE INKJET PAPER - A SIZE (8.5 X 11-INCHES) - 200 SHEETS PER PACKAGE |
|
|
BRIGHT WHITE INKJET PAPER - A SIZE (8.5 X 11-INCHES) - 250 SHEETS |
|
|
BRIGHT WHITE INKJET PAPER - A SIZE (8.5 X 11-INCHES) - 500 SHEETS |
|
|
BRIGHT WHITE INKJET PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS |
|
|
BRIGHT WHITE INKJET PAPER - A4 SIZE (21.0CM X 29.7CM) - 250 SHEETS |
|
|
BRIGHT WHITE INKJET PAPER - A4 SIZE (21.0CM X 29.7CM) - 500 SHEETS |
|
|
BROCHURE AND FLYER PAPER - GLOSSY ON BOTH SIDES - A SIZE (8.5 X 11-INCHES), 98 B |
|
|
CABLE ASSEMBLY - HAS 5-PIN (F) CONNECTOR ON EACH END - 26.5CM (10.4IN) LONG |
|
|
CARRIAGE MOTOR ASSEMBLY (INCLUDES CABLE) |
|
|
CARRIAGE ROD - SUPPORTS HORIZONTAL CARRIAGE MOVEMENT |
|
|
CARRIAGE SHAFT RETAINER CLIP |
|
|
CENTER LIFTER CAP - HOLDS THE PRESSURE PLATE LIFTER AND THE KICKER SPRING IN PLA |
|
|
CHASSIS ASSEMBLY - THE LARGE PLASTIC ITEM THAT FORMS THE BASE OF THE PRINT MECHA |
|
|
CLUSTER GEAR |
|
|
CORNER TRIM - LOWER LEFT SIDE OF BASE ASSEMBLY - QUARTZ GRAY |
|
|
DELUXE GLOSSY PHOTO PAPER - A SIZE (8.5 X 11-INCHES) - 20 SHEETS PER PACK |
|
|
DESKJET 610, 612, 670, 672, 690, 692, 694, 695, 697 BI-DIRECTIONAL INTERFACE KIT |
|
|
DESKJET AND DESKWRITER SERVICE MANUAL ON CD-ROM - VERSION 4.1 |
|
|
DESKJET SETUP POSTER - FOR WINDOWS (ENGLISH, GREEK, RUSSIAN, AND HEBREW) |
|
|
DESKJET SETUP POSTER - FOR WINDOWS (ESTONIAN, LITHUANIAN, BULGARIAN, AND KAZAKH) |
|
|
ENCODER PCA - CONTROLS MOVEMENT OF THE CARRIAGE ASSEMBLY |
|
|
ENCODER SPRING - PROVIDES TENSION FOR ENCODER STRIP |
|
|
ENVELOPE SENSOR |
|
|
ENVELOPE SLED - SUPPORTS FEEDING OF ENVELOPES INTO PRINTER |
|
|
ESD CLIP - PROTECTS STEPPER MOTOR FROM ESD DAMAGE |
|
|
FRICTION PAD - PROVIDES FRICTION FOR MEDIA LENGTH ADJUSTER |
|
|
GREETING CARD PAPER PACK (WHITE) - A SIZE (8.5 X 11-INCHES) - INCLUDES 20 SHEETS |
|
|
GREETING CARD PAPER PACK (WHITE, MATTE) - A4 SIZE (21.0CM X 29.7CM) - INCLUDES 2 |
|
|
GROUND BRACKET - SUPPORTS LOGIC PCA AND PROTECTS IT FROM ESD |
|
|
HP 49 ECONOMY TRI-COLOR INKJET PRINT CARTRIDGE - PRINTS APPROXIMATELY 155 PAGES |
|
|
HP 49 ECONOMY TRI-COLOR INKJET PRINT CARTRIDGE - PRINTS APPROXIMATELY 155 PAGES |
|
|
HP 49A LARGE COLOR CARTRIDGE |
|
|
HP INK CARTRIDGE 20 BLACK EUR |
|
|
HP INK CARTRIDGE 20 BLACK LAR |
|
|
HP INK CRTG 49A LARGE COLOR AP |
|
|
HP INK CRTG 49A LARGE COLOR LAR |
|
|
HP INK CRTG 49A LARGE COLOR NAM |
|
|
HP INK PHOTO CRTG 16A COLOR AP |
|
|
HP INK PHOTO CRTG 16A COLOR CAN |
|
|
HP INK PHOTO CRTG 16A COLOR EUR |
|
|
HP INK PHOTO CRTG 16A COLOR LAR) |
|
|
HP INK PHOTO CRTG 16A COLOR NAM |
|
|
HP TEXTURED HALF-FOLD GREETING CARDS (WHITE) - A SIZE (8.5 X 11-INCHES) |
|
|
IDLER HUB - DRIVE BELT PIVOT POINT ON LEFT SIDE OF CHASSIS |
|
|
INK CARTRIDGE ACCESS COVER (L-SHAPED, QUARTZ GRAY PLASTIC) - LIFT-UP TOP/FRONT C |
|
|
INKJET NON-GLOSSY LX PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS |
|
|
IRON-ON T-SHIRT TRANSFERS - A SIZE (8.5 X 11-INCHES) - 10 SHEETS |
|
|
IRON-ON T-SHIRT TRANSFERS - A4 SIZE (21.0CM X 29.7CM) - 10 SHEETS |
|
|
IRON-ON T-SHIRT TRANSFERS - A4 SIZE (21.0CM X 29.7CM) - 10 SHEETS (ASIA) |
|
|
KICKER - STRAIGHTENS THE STACK OF MEDIA IN THE INPUT TRAY SO THAT THE SEPARATOR |
|
|
KICKER SPRING - PROVIDES TENSION FOR THE KICKER |
|
|
LEFT BRACKET - CARRIAGE ROD ADJUSTMENT BRACKET (LEFT) |
|
|
LEFT LIFTER CAP - HOLDS THE PRESSURE PLATE LIFTER IN PLACE |
|
|
LEVER ARM - USED TO LIFT THE PRESSURE PLATE LIFTER |
|
|
LEVER ARM SPRING - PROVIDES TENSION BETWEEN THE LEVER ARM AND THE PRESSURE PLATE |
|
|
LIFTER SHAFT - PLATE LIKE SHAFT THAT LIFTS THE PRESSURE PLATE |
|
|
LIMITER SPRING - PROVIDES TENSION FOR ROTATION LIMITER |
|
|
NAMEPLATE - C6450A DESKJET 610C PRINTER LOGO |
|
|
NO. 20 BLACK (REGULAR) INK PRINT CARTRIDGE (ASIA/PACIFIC) |
|
|
NO. 20 BLACK (REGULAR) INK PRINT CARTRIDGE (CANADA) |
|
|
OOPS FLAG - OUT OF PAPER SENSOR |
|
|
PAPER WIDTH ADJUSTMENT STOP - ADJUSTS FOR INPUT PAPER WIDTH |
|
|
PHOTO GREETING CARDS (WHITE, MATTE) - A SIZE (8.5 X 11-INCHES), HALF FOLD, PRE-S |
|
|
PHOTO QUALITY INKJET PAPER (MATTE) - WITH TWO SIDED MATTE FINISH - A SIZE (8.5 X |
|
|
PIVOT SPRING - PROVIDES TENSION FOR PIVOT TO RETURN TO UPRIGHT POSITION |
|
|
POWER CORD (BLACK) - 2-WIRE, 18 AWG, 1.8M (6.0FT) LONG - HAS STRAIGHT (F) C7 REC |
|
|
POWER CORD (BLACK) - 2-WIRE, 18 AWG, 1.8M (6.0FT) LONG - HAS STRAIGHT (F) C7 REC |
|
|
POWER SUPPLY MODULE (NMB CORP. CS9-1472) - 220VAC INPUT, 50HZ - 30VDC OUTPUT, 40 |
|
|
POWER SUPPLY MODULE (NMB CORP. CS9-1477) - 220VAC INPUT, 50HZ - 30VDC OUTPUT, 40 |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 100VAC INPUT, 48-66HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 220VAC INPUT, 48-52HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 220VAC INPUT, 48-52HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 220VAC INPUT, 58-62HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 230VAC INPUT, 48-52HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 240VAC INPUT, 48-52HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (TRANSFORMER) - 240VAC INPUT, 58-62HZ - 30VDC OUTPUT, 400MA |
|
|
POWER SUPPLY MODULE (YOKOGAWA AT7001A) - 100-240VAC INPUT, 50/60HZ, 400MA - 24VD |
|
|
PPS ADJUSTER - USED TO ADJUST THE DISTANCE BETWEEN THE PIVOT AND THE PEN |
|
|
PRELOADER - APPLIES DOWNWARD PRESSURE ON DRIVE SHAFT |
|
|
PREMIUM GLOSSY PHOTO PAPER - A4 SIZE (21.0CM X 29.7CM) - 15 SHEETS (JAPAN) |
|
|
PREMIUM INKJET HEAVYWEIGHT PAPER - A4 SIZE (21.0CM X 29.7CM) - COATED ON BOTH SI |
|
|
PREMIUM INKJET RAPID-DRY TRANPARENCIES - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
PREMIUM INKJET RAPID-DRY TRANPARENCIES - A4 SIZE (21.0CM X 29.7CM) - 50 SHEETS |
|
|
PREMIUM INKJET TRANSPARENCY FILM - A SIZE (8.5 X 11-INCHES) - 20 SHEETS |
|
|
PREMIUM INKJET TRANSPARENCY FILM - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
PREMIUM INKJET TRANSPARENCY FILM - A4 SIZE (21.0CM X 29.7CM) - 20 SHEETS |
|
|
PREMIUM PHOTO PAPER (GLOSSY) - A SIZE (8.5 X 11-INCHES) - 15 SHEETS |
|
|
PREMIUM PHOTO PAPER (GLOSSY) - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
PRESSURE PLATE ASSEMBLY - HOLDS MEDIA TO BE PRINTED AGAINST THE PAPER INPUT FEED |
|
|
PROFESSIONAL BROCHURE AND FLYER PAPER (MATTE) - A SIZE (8.5 X 11-INCHES) - 50 SH |
|
|
REAR RAIL - SUPPORTS CARRIAGE ASSEMBLY |
|
|
REAR SLIDER - PREVENTS THE CARRIAGE FROM TILTING FORWARD |
|
|
REPLACEMENT DESKJET 610C - WITHOUT POWER MODULE OR POWER CORD |
|
|
RETURN KIT WITH BOX AND INSTRUCTIONS - FOR RETURNING DEFECTIVE THERMAL INKJET (T |
|
|
RIGHT BRACKET - CARRIAGE ROD ADJUSTMENT BRACKET (RIGHT) |
|
|
RIGHT WALL STOP - MAINTAINS ALIGNMENT OF SMALL MEDIA SIZES IN THE INPUT TRAY |
|
|
ROTATION LIMITER - PROVIDES CORRECT PRESSURE TO CAP PEN |
|
|
RUBBER FOOT - REPLACEMENT RUBBER FOOT FOR THE BOTTOM OF THE PRINTER (TWO USED) |
|
|
SENSOR PC BOARD - CONTAINS OPTICAL MEDIA SENSORS AND MECHANICAL SWITCH FOR ACCES |
|
|
SEPARATOR LIFTER |
|
|
SEPARATOR PEG - LIFTS THE SEPARATOR PAD WHEN THE LIFTER SHAFT LIFTS |
|
|
SEPARATOR SPRING - PROVIDES PRESSURE BETWEEN THE SEPARATOR ASSEMBLY AND THE CENT |
|
|
SLED BIAS SPRING - HOLDS SLED IN POSITION IN SERVICE STATION |
|
|
SPITTOON - HOLDS INK EXPELLED FROM CARTRIDGE DURING REFRESH CYCLE |
|
|
SPRING - INSTALLED IN SPITTOON ASSEMBLY |
|
|
SWITCH LEVER - ACTUATES ACCESS DOOR (OPEN) SWITCH |
|
|
TOP COVER - MAIN UPPER HOUSING WITH MOLDED INPUT TRAY - DOES NOT INCLUDE CARTRID |
|
|
TOP COVER ASSEMBLY - INCLUDES TOP COVER AND KEYPAD ASSEMBLY - DOES NOT INCLUDE C |
|
|
TRI-COLOR INK ECONOMY PRINT CARTRIDGE - PRINTS APPROXIMATELY 155 PAGES BASED ON |
|
|
TRI-COLOR INK ECONOMY PRINT CARTRIDGE - PRINTS APPROXIMATELY 155 PAGES BASED ON |
|
|
TRI-COLOR INK PRINT CARTRIDGES - (TWO-PACK OF 51649A) - EACH PRINTS APPROXIMATEL |
|
|
USER INSTRUCTION LABEL |
|
|
WING HOLDER - SUPPORTS OUTPUT TRAY WINGS DURING SHIPPING |