Manufacturer
HP
Model Number
Q1342A
Description
Laserjet 1000 Series
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
17-TOOTH GEAR ASSEMBLY - INCLUDES THE 17-TOOTH GEAR MOUNTED ON A BLACK PLASTIC L |
|
|
29 TOOTH GEAR |
|
|
4-WIRE CABLE ASSEMBLY |
|
|
69 TOOTH GEAR - LARGE GEAR WITH RIBS AND SIX SMALL HOLES |
|
|
COMPRESSION SPRING |
|
|
CONNECTOR PC BOARD ASSEMBLY - HAS CONNECTOR FOR THE CABLE |
|
|
DELIVERY SENSOR PC BOARD - SMALL BOARD WITH OPTICAL FLAG SENSOR (FLAG NOT INCLUD |
|
|
ENGINE CONTROL PC BOARD - MAIN LOGIC AND POWER SUPPLY BOARD |
|
|
ENGINE CONTROL PC BOARD - MAIN LOGIC AND POWER SUPPLY BOARD FOR THE PRINTER (FOR |
|
|
FACE-UP (STRAIGHT THROUGH) OUTPUT ROLLER - METAL SHAFT WITH TWO ROLLERS |
|
|
FRONT COVER - LOWER FRONT OF PRINTER - WITH OPENING FOR INSERTING THE PAPER INPU |
|
|
FRONT GUIDE ASSEMBLY - RIBBED PLASTIC PIECE THAT RUNS THE WIDTH OF THE PRINTER |
|
|
FUSING ASSEMBLY - FOR 220VAC TO 240VAC OPERATION - BONDS THE TONER TO THE PAPER |
|
|
GEAR/CLUTCH ASSEMBLY KIT - INCLUDES DOUBLE-GEAR BODY, SHAFT ATTACHMENT PIECE AND |
|
|
GROUNDING PLATE - L-SHAPED, SPRING STEEL |
|
|
HP LASERJET TOUGH PAPER - A4 SIZE (21.0CM X 29.7CM) |
|
|
HP LOGO (JEWEL) - FOR HP LASERJET SERIES PRINTERS |
|
|
LASER/SCANNER ASSEMBLY - MOUNTS ON TOP OF THE PRINT STRUCTURE FRAME |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH AND SIMPLIFIED CHINESE) |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, ARABIC AND FRENCH) |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, FRENCH, SPANISH AND PORTUGU |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, HEBREW, TURKISH, RUSSIAN, H |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, POLISH, CZECHOSLOVAKIAN, HU |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, RUSSIAN, KAZAKH, BULGARIAN |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, SWEDISH, FINNISH, DANISH, N |
|
|
LASERJET 1000 SERIES GETTING STARTED GUIDE (ENGLISH, TRADITIONAL CHINESE (TAIWAN |
|
|
LASERJET 1000 SERVICE MANUAL - PRINTED VERSION (ENGLISH) |
|
|
LASERJET PART LIST BOOKLET - COVERS LASERJET 1005, 1010, 1012, 1015, 1200, 2300, |
|
|
LASERJET PRINTER TRANSPARENCY FILM - A4 SIZE (21.0CM X 29.7CM) - 50 SHEETS |
|
|
LASERJET QUICK REFERENCE SERVICE GUIDE (MONOCHROME) - VOLUME IV |
|
|
LED STATUS PANEL ASSEMBLY (OR CONTROL PANEL) - PLASTIC FRONT COVER SUPPORT WITH |
|
|
LEFT SIDE COVER - HAS CUT-OUT FOR THE CABLE POD ASSEMBLY |
|
|
LEFT SIDE FUSER BRACKET (L-SHAPED) - PROVIDES MOUNTING SUPPORT FOR THE FUSING AS |
|
|
LEFT SIDE PLATE ASSEMBLY - INTERNAL METAL PLATE THAT THE CONNECTOR PC BOARD MOUN |
|
|
MOUNTING SUPPORT |
|
|
PAPER FEED ROLLER ASSEMBLY - INCLUDES FEED ROLLER, FEED ROLLER BASE ASSEMBLY, RE |
|
|
PAPER LIFT PLATE ASSEMBLY - PLASTIC PLATE ASSEMBLY THAT INCLUDES THE TWO BLUE PA |
|
|
PAPER PICKUP ASSEMBLY - INCLUDES THE FEED ROLLER ASSEMBLY, SEPARATION PAD, PLAST |
|
|
PAPER SENSOR PC BOARD - SMALL BOARD WITH OPTICAL FLAG SENSOR (FLAG NOT INCLUDED) |
|
|
POWER CORD (BLACK) - 17 AWG, 2.3M (7.5FT) LONG - HAS STRAIGHT (F) RECEPTACLE (FO |
|
|
POWER CORD (FLINT GRAY) - 18 AWG, 1.9M (6.25FT) LONG - HAS STRAIGHT (F) C13 RECE |
|
|
POWER CORD (FLINT GRAY) - 3-WIRE, 16 AWG, 2.3M (7.5FT) LONG - HAS STRAIGHT (F) C |
|
|
POWER CORD (FLINT GRAY) - 3-WIRE, 2.3M (7.5FT) LONG - HAS STRAIGHT (F) RECEPTACL |
|
|
PRINTED CIRCUIT BOARD SPACER |
|
|
RIGHT SIDE COVER ASSEMBLY - HAS MOLDED-IN AIR INTAKE LOUVERS |
|
|
RIGHT SIDE COVER MOUNTING SUPPORT |
|
|
RIGHT SIDE FUSER BRACKET (L-SHAPED) - PROVIDES MOUNTING SUPPORT FOR THE FUSING A |
|
|
RIGHT SIDE PLATE ASSEMBLY - INCLUDES THE RIGHT SIDE PLATE, DRIVE MOTOR, MOST ALL |
|
|
ROLLER BUSHING/RETAINER |
|
|
RUBBER FOOT |
|
|
RUBBER FOOT - FOR BOTTOM OF PRINTER - THREE USED |
|
|
SCREW KIT - INCLUDES NINE BAGS OF DIFFERENT SIZE SCREWS |
|
|
SHEET PROTECTORS - 0.1MM (4.0 MIL) THICK POLYPROPYLENE SHEET PROTECTORS FOR 'A' |
|
|
SHEET PROTECTORS - 0.1MM (4.0 MIL) THICK POLYPROPYLENE SHEET PROTECTORS FOR 'A4' |
|
|
SHUTTER LEVER - SPRING LOADED LEVER - MOUNTS TO THE TOP OF THE LASER/SCANNER ASS |
|
|
SNAP-IN CABLE CLAMP |
|
|
STEPPER MOTOR ASSEMBLY |
|
|
SUPPORT PAN (CASE) FOR THE ENGINE CONTROLLER PC BOARD |
|
|
TONER CLEANING CLOTH - SPECIALLY TREATED CLOTH FOR ABSORBING TONER (1 PER PACKAG |
|
|
TORSION SPRING - PROVIDES HIGH VOLTAGE CONNECTION TO THE TONER CARTRIDGE (DEVELO |
|
|
ULTRA-PRECISE BLACK TONER CARTRIDGE - WILL PRINT APPROXIMATELY 2,500 PAGES |
|
|
ULTRAPRECISE BLACK TONER CARTRIDGE - WILL PRINT APPROXIMATELY 2,500 PAGES BASED |