Manufacturer
HP
Model Number
Q2447A
Description
Laserjet 4200dtnsl
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
128MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
128MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
14T/30T CLUSTER GEAR |
|
|
16MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
16MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
18 TOOTH GEAR - LOCATED ON RIGHT SIDE OF PRINTER IN THE 500 SHEET TRAY PAPER PIC |
|
|
23 GEAR - GEAR THAT DRIVES PAPER FEED ROLLER - ATTACHES TO FEED ROLLER SHAFT |
|
|
2MB FLASH DIMM MEMORY - FONT STORAGE DEVICE |
|
|
30-TOOTH GEAR - BLACK PLASTIC GEAR THAT ATTACHES TO PAPER FEED ASSEMBLY CLUTCH |
|
|
32MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
500 SHEET STAPLER STACKER PAPER OUTPUT ASSEMBLY |
|
|
500-SHEET PAPER FEEDER AND TRAY/CASSETTE - THIS IS THE ASSEMBLY FRAME AND TRAY T |
|
|
500-SHEET TRAY/CASSETTE - THIS IS ONLY THE TRAY, DOES NOT INCLUDE FEEDER OR FRAM |
|
|
6-PIN CONNECTOR AND HOUSING ASSEMBLY |
|
|
64MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
8MB SIMPLIFIED CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB TRADITIONAL CHINESE MROM DIMM - FOR LASERJET PRINTERS |
|
|
8MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
8MB, 100MHZ SDRAM DIMM MEMORY MODULE |
|
|
A/C INPUT CONNECTOR/CABLE - 120VAC INPUT CONNECTOR TO J1 POWER SUPPLY CONNECTOR |
|
|
A/C INPUT CONNECTOR/CABLE - 220VAC INPUT CONNECTOR TO J1 POWER SUPPLY CONNECTOR |
|
|
ACCESSORY CABLE/CONNECTOR - CONNECTOR FOR STACKER AND STACKER/STAPLER ACCESSORY |
|
|
ALIGNMENT GUIDE RIB - DUPLEXER SKEW COUNTERMEASURE |
|
|
AUTOMATIC DUPLEXER ASSEMBLY - FOR LASERJET 4200/4250 AND 4300/4350 SERIES PRINTE |
|
|
AUTOMATIC DUPLEXER ASSEMBLY - FOR LASERJET 4200/4250 AND 4300/4350 SERIES PRINTE |
|
|
BASE PLATE FOR 500 SHEET FEEDER ASSEMBLY |
|
|
BLACK TONER CARTRIDGE - WITH 'MICRO-FINE' TONER - PRINTS APPROXIMATELY 12,000 PA |
|
|
BLACK TONER CARTRIDGE - WITH 'MICRO-FINE' TONER - PRINTS APPROXIMATELY 18,000 PA |
|
|
BUSHING - ON RIGHT SIDE OF PAPER PICKUP DRIVE ASSEMBLY |
|
|
CABLE AND CONNECTOR ON BOTTOM RIGHT REAR OF 500 SHEET FEEDER ASSEMBLY |
|
|
CABLE AND CONNECTOR ON TOP RIGHT REAR OF 500 SHEET FEEDER ASSEMBLY |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE FOR PAPER PICKUP AND FEED ROLLERS IN TRAY |
|
|
CONNECTING CABLE GUIDE - ROUTES AND PROTECTS ALL CABLES RUNNING FROM TOP PORTION |
|
|
CONTROL PANEL ASSEMBLY |
|
|
CONTROL PANEL CABLE |
|
|
CONTROL PANEL OVERLAY (SPANISH) |
|
|
CONTROL PANEL OVERLAY - ENGLISH |
|
|
COOLING FAN - LOCATED ON LEFT SIDE OF PRINTER (FN101) |
|
|
COOLING FAN - LOCATED ON RIGHT SIDE OF PRINTER - PROVIDES AIR TO THE PRINT CARTR |
|
|
COVER PLATE - PLASTIC COVER ON RIGHT FRONT CORNER OF 500 SHEET FEEDER TRAY - COV |
|
|
DC CONTROLLER BOARD - DC CONTROLLER FOR LASERJET 4200 SERIES |
|
|
DC CONTROLLER BOARD - FOR LASERJET 4300 SERIES |
|
|
DC CONTROLLER BOARD CABLE GUIDE |
|
|
DC CONTROLLER FLAT CABLE GUIDE |
|
|
DC CONTROLLER TO FUSER SAFETY CIRCUIT, HIGH VOLTAGE POWER SUPPLY (HVPS), ELECTRO |
|
|
DROP DOWN TRAY 1 - INCLUDES ADJUSTABLE PAPER WIDTH GUIDE ASSEMBLY |
|
|
DUPLEXER CONNECTOR - CONNECTOR ON POWER SUPPLY ASSEMBLY FOR DUPLEXER |
|
|
DUPLEXER CONNECTOR - CONNECTOR ON POWER SUPPLY ASSEMBLY FOR DUPLEXER |
|
|
DUPLEXER SLOT COVER - REMOVABLE LOWER REAR COVER FOR DUPLEXER ATTACHMENT SLOT |
|
|
DUPLEXING PENDULUM ASSEMBLY - GEAR ASSEMBLY THAT TRANSFERS POWER FROM MAIN MOTOR |
|
|
E-TYPE RETAINER RING |
|
|
ENVELOPE COVER - PLASTIC PIECE ABOVE TRAY 1 PICKUP ROLLER |
|
|
ENVELOPE FEEDER CABLE - FROM DC CONTROLLER BOARD TO ENVELOPE FEEDER CONNECTOR - |
|
|
ENVIRONMENT TEMPERATURE DETECTION THERMISTOR - DETECTS AMBIENT AIR TEMPERATURE T |
|
|
FAN COVER - METAL SUPPORT STRAP THAT MAIN COOLING FAN FASTENS TO - FOR FAN FN101 |
|
|
FAN ROD - METAL ROD THAT MOUNTS AGAINST FAN 2 ON RIGHT SIDE OF PRINTER - USED FO |
|
|
FEED ROLLER SHAFT BUSHING - BUSHING ON RIGHT SIDE OF PRINTER THAT SUPPORTS THE F |
|
|
FEEDER CONTROL PC BOARD |
|
|
FORMATTER BOARD COVER |
|
|
FRONT COVER - DROP DOWN TRAY 1 |
|
|
FRONT DOOR SENSOR CABLE - CONNECTS BETWEEN THE SENSOR IN THE FEEDER LIFTER DRIVE |
|
|
FRONT DOOR STOP ARM - THIN PLASTIC ARM BETWEEN THE FRONT DOOR AND THE LOWER FRAM |
|
|
FUSER ASSEMBLY - FOR LASERJET 4200 SERIES - 110VAC |
|
|
FUSER ASSEMBLY FOR LASERJET 4200 SERIES - 220VAC |
|
|
FUSER ASSEMBLY FOR LASERJET 4200 SERIES - FOR 110 VAC OPERATION |
|
|
FUSER CABLE - MAIN FUSER CABLE FOR LASERJET 4200 SERIES |
|
|
FUSING ROLLER ASSEMBLY - 110 VOLT |
|
|
GEAR - 23 TOOTH GEAR IN LOWER FRONT SECTION OF PICKUP DRIVE ASSEMBLY |
|
|
GUIDE FOR SCANNER CABLE 1 |
|
|
GUIDE FOR SCANNER CABLE 2 |
|
|
HIGH GLOSS LASERJET PAPER - HIGH GLOSS FINISH ON BOTH SIDES, 95 BRIGHTNESS - A S |
|
|
HIGH GLOSS LASERJET PAPER - HIGH GLOSS FINISH ON BOTH SIDES, 95 BRIGHTNESS - A4 |
|
|
HP COLOR LASER MATTE BROCHURE PAPER - A SIZE (8.5 X 11-INCHES) - 150 SHEETS |
|
|
HP COLOR LASER SOFT-GLOSS PRESENTATION PAPER - A SIZE (8.5 X 11-INCHES) - 200 SH |
|
|
HP JET DIRECT 300X EXTERNAL PRINT SERVER MODULE (THREE PACK) (10BASE-T AND 100BA |
|
|
HP JETDIRECT 170X EXTERNAL PRINT SERVER |
|
|
HP JETDIRECT 170X EXTERNAL PRINT SERVER MODULE (10BASE-T) - CONNECTS BETWEEN PRI |
|
|
HP JETDIRECT 500X EXTERNAL TOKEN RING PRINT SERVER MODULE - INTERFACES UP TO 3 P |
|
|
HP JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BO |
|
|
HP JETDIRECT 625N INTERNAL ETHERNET PRINT SERVER - PROVIDES 10BASET, 100BASETX, |
|
|
HP JETDIRECT 635N IPV6/IPSEC PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE |
|
|
HP LASERJET TOUGH PAPER - A4 SIZE (21.0CM X 29.7CM) |
|
|
HP PRINTER STAND & CABINET (LJ4200/4300) |
|
|
HP PROFESSIONAL LASER SOFT-GLOSS PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS |
|
|
INNER RIGHT FRONT COVER |
|
|
INTERFACE CABLE ASSEMBLY - CONNECTS BETWEEN THE 6-PIN INTERFACE CONNECTOR AND TH |
|
|
JETDIRECT 610N TOKEN RING LAN INTERFACE BOARD - DB-9 AND RJ-45 CONNECTORS |
|
|
JETDIRECT 615N INTERNAL PRINT SERVER (10BASE-T AND 100BASE-TX) LAN INTERFACE BOA |
|
|
JETDIRECT CONNECTIVITY CARD - HAS ONE USB PORT, ONE SERIAL (DB9) PORT, AND ONE L |
|
|
LASER CABLE - CONNECTS BETWEEN DC CONTROLLER BOARD AND LASER SCANNER UNIT - J145 |
|
|
LASER SCANNER SHUTTER LEVER - FOUR USED |
|
|
LASERJET 4200 MAINTENANCE KIT - (120V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200 MAINTENANCE KIT - (120V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200 MAINTENANCE KIT - (220V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200 SERIES NAME PLATE KIT - INCLUDES ALL MODEL LABELS FOR LASERJET 420 |
|
|
LASERJET 4200/4300 COMBINED PRODUCT FAMILY SERVICE MANUAL |
|
|
LASERJET PART LIST BOOKLET - COVERS LASERJET 1005, 1010, 1012, 1015, 1200, 2300, |
|
|
LASERJET PRINTER TRANSPARENCY FILM - A4 SIZE (21.0CM X 29.7CM) - 50 SHEETS |
|
|
LASERJET QUICK REFERENCE SERVICE GUIDE (MONOCHROME) - VOLUME IV |
|
|
LEFT SIDE COVER ASSEMBLY - FOR THE 1,500 SHEET PAPER FEEDER ASSEMBLY |
|
|
LEFT SIDE COVER FOR 500 SHEET PAPER FEEDER ASSEMBLY |
|
|
LEFT SIDE COVER PANEL |
|
|
LEFT SIDE SHUTTER ASSEMBLY - BLOCKS LIGHT FROM SCANNER ON LEFT SIDE |
|
|
LIFTER DRIVE ASSEMBLY SUPPORT - TRAY 2 PAPER PICKUP LIFTER DRIVE SUPPORT ASSEMBL |
|
|
LIFTER DRIVER ASSEMBLY - INCLUDES THE THREE DRIVE GEARS, SWING ARM, TENSION SPRI |
|
|
M3 STEPPED SHAFT SCREW |
|
|
M4X10 PHILLIPS SCREW WITH BROAD FLAT WASHER HEAD - SHEET METAL THREAD |
|
|
MAIN DRIVE ASSEMBLY - MAIN GEAR ASSEMBLY ON RIGHT SIDE OF PRINTER |
|
|
MAIN MOTOR - MOTOR ON FRONT RIGHT SIDE OF PRINTER - M101 |
|
|
MEDIA SIZE SENSOR CABLE ASSEMBLY - CONNECTS BETWEEN THE PAPER SIZE SENSOR ASSEMB |
|
|
MEMORY CABLE - FROM DC CONTROLLER BOARD TO THE TONER CARTRIDGE WIRELESS MEMORY C |
|
|
METAL ROD BETWEEN EXTERNAL POWER BUTTON AND SWITCH ON POWER SUPPLY BOARD |
|
|
MOTOR - STEPPER MOTOR IN 1500 SHEET FEEDER ASSEMBLY |
|
|
PAPER DELIVERY ASSEMBLY - PAPER OUTPUT ROLLER ASSEMBLY |
|
|
PAPER FEED ASSEMBLY CLUTCH (CL101) - ELECTRO MECHANICAL CLUTCH THAT CONNECTS TO |
|
|
PAPER FEED BELT GUIDE FOR LEFT SIDE |
|
|
PAPER FEED BELT GUIDE FOR RIGHT SIDE |
|
|
PAPER FEED ROLLER ASSEMBLY |
|
|
PAPER FEED SENSOR FLAG - FOR TRAY 1 |
|
|
PAPER FEED SHAFT ASSEMBLY - NOT AVAILABLE AS AN ASSEMBLY - ORDER FEED ROLLER SHA |
|
|
PAPER FEEDER ASSEMBLY PC BOARD - PC BOARD ON RIGHT SIDE OF 500 SHEET PAPER FEEDE |
|
|
PAPER LEVEL SENSOR GEAR ASSEMBLY |
|
|
PAPER LIFTING PLATE - METAL PLATE IN THE BOTTOM OF CASSETTE - SEPERATION PAD INC |
|
|
PAPER PICKUP ARM - PICKUP AND FEED ROLLER HOLDER FOR TRAY 2 PAPER PICKUP ASSEMBL |
|
|
PAPER PICKUP ARM HOLDER - HOLDER FOR PICKUP ROLLER SHAFT |
|
|
PAPER PICKUP ASSEMBLY - PAPER PICKUP DRIVE ASSEMBLY FOR TRAY 1/MULTIPURPOSE INPU |
|
|
PAPER PICKUP ROLLER - GRAY SPONGY RUBBER ROLLER ON A WHITE CYLINDER AND 24-TOOTH |
|
|
PAPER PICKUP SOLENOID |
|
|
PAPER SENSOR ASSEMBLY - INCLUDES THE SUPPORT TRAY WITH THE PAPER STACK SURFACE A |
|
|
PAPER SENSOR FLAG FOR TRAY 2 PAPER PICKUP ASSEMBLY |
|
|
PAPER SENSOR FLAG HOLDER |
|
|
PAPER SIZE SENSING FLAG - WHITE PLASTIC ARM USED AS MECHANICAL LINK TO TRAY SIZE |
|
|
PAPER SIZE SENSING SHAFT |
|
|
PAPER SIZE SENSOR ASSEMBLY - INCLUDES THE THREE SIZE FINGERS, MICRO-SWITCH ASSEM |
|
|
PAPER SIZE SENSOR BLOCK - SPRING LOADED BLOCK WHICH ACTIVATES THE PAPER SIZE SEN |
|
|
PAPER TRANSFER ASSEMBLY |
|
|
POWER CABLE FOR TRAY 3 PAPER FEEDER - BLACK CONNECTOR WITH 42MM SIX WIRE CABLE T |
|
|
POWER SUPPLY ASSEMBLY - 220VAC |
|
|
PRESSURE ROLLER - ROLLER IN FUSING ASSEMBLY THAT PROVIDES PRESSURE FOR MEDIA AGA |
|
|
PRINTER STAND WITH STORAGE CABINET |
|
|
REAR COVER - REAR PLASTIC COVER FOR 500 SHEET PAPER FEEDER |
|
|
REAR COVER ASSEMBLY - BOX TYPE COVER FOR THE REAR OF THE 1,500 SHEET PAPER FEEDE |
|
|
REAR OUTPUT TRAY ASSEMBLY - INCLUDES UPPER REAR PAPER OUTPUT TRAY AND COVER |
|
|
REGISTRATION ROLLER ASSEMBLY |
|
|
RELEASE HOOK SHAFT |
|
|
RELEASE HOOK SHAFT SUPPORT - RIGHT SIDE RELEASE SHAFT FRAME - ALSO FRAME FOR REL |
|
|
RETAINING RING (E-TYPE) |
|
|
RIGHT SIDE COVER ASSEMBLY |
|
|
RIGHT SIDE COVER ASSEMBLY - FOR THE 1,500 SHEET PAPER FEEDER ASSEMBLY |
|
|
RIGHT SIDE COVER FOR 500 SHEET PAPER FEEDER ASSEMBLY |
|
|
RIGHT SIDE TRAY 2 PAPER CASSETTE GUIDE |
|
|
ROLLER BUSHING - BUSHING THAT SUPPORTS MIDDLE OF PAPER DELIVERY ROLLER |
|
|
SCREW - 6 MM PHILLIPS HEAD SCREW WITH ATTACHED WASHER |
|
|
SENSOR CABLE ASSEMBLY - FOR 500 SHEET FEEDER ASSEMBLY |
|
|
SIZE SENSOR CABLE - CABLE THAT CONNECTS TO PAPER SIZE SENSORS IN 500 SHEET FEEDE |
|
|
SOFT GLOSS COLOR LASERJET PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS PER PAC |
|
|
SOFT GLOSS LASERJET PAPER - SOFT GLOSS FINISH ON BOTH SIDES, 95 BRIGHTNESS - A S |
|
|
SOFT GLOSS LASERJET PAPER - SOFT GLOSS FINISH ON BOTH SIDES, 95 BRIGHTNESS - A4 |
|
|
STAPLE CARTRIDGE ASSEMBLY - HAS 1,000 STAPLES - FOR THE STAPLE MODULE ASSEMBLY I |
|
|
STAPLE CARTRIDGE ASSEMBLY - HAS 1,000 STAPLES - FOR THE STAPLE MODULE ASSEMBLY I |
|
|
SUPPORT GUIDE - SUPPORTS RIGHT REAR SIDE OF POWER SUPPLY BOARD |
|
|
SWING PLATE - PIVOT MOUNT FOR PICKUP ROLLER SHAFT |
|
|
SWING PLATE ASSEMBLY - FOR TRAY 2 PAPER LIFT ASSEMBLY - LOCATED BETWEEN THE MAIN |
|
|
TENSION SPRING - PROVIDES TENSION FOR LIFTER DRIVE ASSEMBLY |
|
|
TENSION SPRING HOLDER BRACKET ON LEFT SIDE OF PAPER FEEDER FRAME |
|
|
THERMISTOR HOLDER - METAL OUTSIDE HALF OF THERMISTOR HOLDER |
|
|
THERMISTOR HOLDER - PLASTIC INSIDE HALF OF THERMISTOR HOLDER |
|
|
TONER CARTRIDGE ARM - MECHANICAL LINK BETWEEN MAIN DRIVE ASSEMBLY AND TONER CART |
|
|
TONER CARTRIDGE MOTOR - MOTOR M102 |
|
|
TONER CLEANING CLOTH - SPECIALLY TREATED CLOTH FOR ABSORBING TONER (1 PER PACKAG |
|
|
TOP BIN FULL SENSOR CABLE |
|
|
TOP COVER ASSEMBLY - TOP PAPER OUTPUT TRAY AND TOP OF PRINTER |
|
|
TOP COVER CABLE - FROM TOP COVER MICROSWITCH (SW101) TO DC CONTROLLER BOARD |
|
|
TOP COVER INTERLOCK ACCESS SWITCH |
|
|
TOP REAR COVER OF PRINTER - REMOVES FOR STAPLER/STACKER INSTALLATION |
|
|
TORQUE LIMITER - TORQUE LIMITER FOR 500 SHEET PAPER FEEDER PICKUP ROLLER |
|
|
TRANSFER ROLLER ASSEMBLY - LONG BLACK SPONGY ROLLER THAT TRANSFERS CHARGE TO PAP |
|
|
TRANSPORT ROLLER SPRING |
|
|
TRAY 1 PAPER INPUT ASSEMBLY |
|
|
TRAY 1 PICKUP ROLLER - D-SHAPED ROLLER LOCATED UNDER THE ENVELOPE COVER |
|
|
TRAY 1 SOLENOID - ENGAGES TRAY 1 PICK-UP ROLLER |
|
|
TRAY 2 LIFTER DRIVE ASSEMBLY - PROVIDES LIFT SUPPORT FOR PAPER TRAY |
|
|
TRAY 2 PAPER PICKUP SENSOR CABLE ASSEMBLY - CONNECTS TO SENSORS PS101 AND PS107 |
|
|
UPPER FRONT COVER - SMALL PIECE OF PLASTIC ON TOP FRONT EDGE OF 500 SHEET FEEDER |
|
|
WHITE ADDRESS LABELS - 1.3CM (0.5IN) X 4.4CM (1.7IN) - 80 LABELS PER SHEET, 25 S |
|
|
WHITE ADDRESS LABELS - 3.4CM (1.3IN) X 10CM (4IN) - 14 LABELS PER SHEET, 100 SHE |
|
|
WHITE ADDRESS LABELS - 3.4CM (1.3IN) X 10CM (4IN) - 14 LABELS PER SHEET, 25 SHEE |
|
|
WHITE ADDRESS LABELS - 5CM (2IN) X 10CM (4IN) - 10 LABELS PER SHEET, 25 SHEETS P |
|
|
WHITE ADDRESS LABELS - 8.4CM (3.3IN) X 10CM (4IN) - 6 LABELS PER SHEET, 100 SHEE |
|
|
WHITE FULL-SHEET LABELS - A SIZE (8.5 X 11-INCHES) - 100 SHEETS |
|
|
WHITE FULL-SHEET LABELS - A SIZE (8.5 X 11-INCHES) - 25 SHEETS |
|
|
WHITE LABELS - 2.5CM (1.0IN) X 6.6CM (2.6IN) - 30 LABELS PER SHEET, 100 SHEETS P |
|
|
WHITE LABELS - 2.5CM (1.0IN) X 6.6CM (2.6IN) - 30 LABELS PER SHEET, 25 SHEETS PE |