Manufacturer
HP
Model Number
Q3995A
Description
No description available
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
10GB MINIMUM, 20GB MAXIMUM EIO HARD DISK - CAN BE INSTALLED IN PRINTERS WITH EIO |
|
|
16MB, 100-PIN SDRAM DIMM MEMORY MODULE |
|
|
18 TOOTH GEAR - LOCATED ON RIGHT SIDE OF PRINTER IN THE 500 SHEET TRAY PAPER PIC |
|
|
2MB FLASH DIMM MEMORY - FONT STORAGE DEVICE |
|
|
30-TOOTH GEAR - BLACK PLASTIC GEAR THAT ATTACHES TO PAPER FEED ASSEMBLY CLUTCH |
|
|
500-SHEET PAPER FEEDER AND TRAY/CASSETTE - THIS IS THE ASSEMBLY FRAME AND TRAY T |
|
|
500-SHEET TRAY/CASSETTE - THIS IS ONLY THE TRAY, DOES NOT INCLUDE FEEDER OR FRAM |
|
|
8MB, 100MHZ SDRAM DIMM MEMORY MODULE |
|
|
AC CABLE - LOW VOLTAGE POWER SUPPLY (LVPS) TO FUSER POWER SUPPLY CABLE |
|
|
ACCESSORY CABLE/CONNECTOR - CONNECTOR FOR STACKER AND STACKER/STAPLER ACCESSORY |
|
|
AUTOMATIC DUPLEXER ASSEMBLY - FOR LASERJET 4200/4250 AND 4300/4350 SERIES PRINTE |
|
|
BLACK TONER CARTRIDGE - WITH 'MICRO-FINE' TONER - PRINTS APPROXIMATELY 12,000 PA |
|
|
BUSHING - ON RIGHT SIDE OF PAPER PICKUP DRIVE ASSEMBLY |
|
|
CABLE AND CONNECTOR ON BOTTOM RIGHT REAR OF 500 SHEET FEEDER ASSEMBLY |
|
|
CABLE AND CONNECTOR ON TOP RIGHT REAR OF 500 SHEET FEEDER ASSEMBLY |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE FOR PAPER PICKUP AND FEED ROLLERS IN TRAY |
|
|
CONNECTING CABLE GUIDE - ROUTES AND PROTECTS ALL CABLES RUNNING FROM TOP PORTION |
|
|
CONTROL PANEL ASSEMBLY |
|
|
CONTROL PANEL CABLE |
|
|
CONTROL PANEL OVERLAY (SPANISH) |
|
|
CONTROL PANEL OVERLAY - ENGLISH |
|
|
COOLING FAN - LOCATED ON LEFT SIDE OF PRINTER (FN101) |
|
|
COOLING FAN - LOCATED ON RIGHT SIDE OF PRINTER - PROVIDES AIR TO THE PRINT CARTR |
|
|
COVER PLATE - PLASTIC COVER ON RIGHT FRONT CORNER OF 500 SHEET FEEDER TRAY - COV |
|
|
DC CONTROLLER BOARD - DC CONTROLLER FOR LASERJET 4200 SERIES |
|
|
DC CONTROLLER BOARD - FOR LASERJET 4300 SERIES |
|
|
DC CONTROLLER BOARD CABLE GUIDE |
|
|
DC CONTROLLER FLAT CABLE GUIDE |
|
|
DC CONTROLLER TO FUSER SAFETY CIRCUIT, HIGH VOLTAGE POWER SUPPLY (HVPS), ELECTRO |
|
|
DROP DOWN TRAY 1 - INCLUDES ADJUSTABLE PAPER WIDTH GUIDE ASSEMBLY |
|
|
DUPLEXER SLOT COVER - REMOVABLE LOWER REAR COVER FOR DUPLEXER ATTACHMENT SLOT |
|
|
DUPLEXING PENDULUM ASSEMBLY - GEAR ASSEMBLY THAT TRANSFERS POWER FROM MAIN MOTOR |
|
|
E-TYPE RETAINER RING |
|
|
ENVELOPE COVER - PLASTIC PIECE ABOVE TRAY 1 PICKUP ROLLER |
|
|
ENVELOPE FEEDER CABLE - FROM DC CONTROLLER BOARD TO ENVELOPE FEEDER CONNECTOR - |
|
|
ENVIRONMENT TEMPERATURE DETECTION THERMISTOR - DETECTS AMBIENT AIR TEMPERATURE T |
|
|
FAN COVER - METAL SUPPORT STRAP THAT MAIN COOLING FAN FASTENS TO - FOR FAN FN101 |
|
|
FEED ROLLER SHAFT BUSHING - BUSHING ON RIGHT SIDE OF PRINTER THAT SUPPORTS THE F |
|
|
FORMATTER BOARD ASSEMBLY FOR LJ4200L/LN/LVN |
|
|
FORMATTER BOARD COVER |
|
|
FRONT COVER - DROP DOWN TRAY 1 |
|
|
FUSER ASSEMBLY - FOR LASERJET 4200 SERIES - 110VAC |
|
|
FUSER ASSEMBLY FOR LASERJET 4200 SERIES - 220VAC |
|
|
FUSER ASSEMBLY FOR LASERJET 4200 SERIES - FOR 110 VAC OPERATION |
|
|
FUSER CABLE - MAIN FUSER CABLE FOR LASERJET 4200 SERIES |
|
|
FUSING ROLLER ASSEMBLY - 110 VOLT |
|
|
GUIDE FOR SCANNER CABLE 1 |
|
|
GUIDE FOR SCANNER CABLE 2 |
|
|
HP COLOR LASER MATTE BROCHURE PAPER - A SIZE (8.5 X 11-INCHES) - 150 SHEETS |
|
|
HP COLOR LASER SOFT-GLOSS PRESENTATION PAPER - A SIZE (8.5 X 11-INCHES) - 200 SH |
|
|
HP JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BO |
|
|
HP MULTIPURPOSE PAPER - A SIZE (8.5 X 11-INCHES) - 500 SHEETS |
|
|
HP PRINTER STAND & CABINET (LJ4200/4300) |
|
|
HP PROFESSIONAL LASER SOFT-GLOSS PAPER - A4 SIZE (21.0CM X 29.7CM) - 200 SHEETS |
|
|
INNER RIGHT FRONT COVER |
|
|
JETDIRECT CONNECTIVITY CARD - HAS ONE USB PORT, ONE SERIAL (DB9) PORT, AND ONE L |
|
|
LASER SCANNER SHUTTER LEVER - FOUR USED |
|
|
LASERJET 4200 MAINTENANCE KIT - (120V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200 MAINTENANCE KIT - (120V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200 MAINTENANCE KIT - (220V) - INCLUDES FUSING ASSEMBLY, SEPARATION RO |
|
|
LASERJET 4200/4300 COMBINED PRODUCT FAMILY SERVICE MANUAL |
|
|
LASERJET 4200L SERIES FIRMWARE DIMM |
|
|
LASERJET 4200L SERIES NAME PLATE KIT - INCLUDES LABEL FOR LASERJET 4200L SERIES |
|
|
LEFT SIDE COVER FOR 500 SHEET PAPER FEEDER ASSEMBLY |
|
|
LEFT SIDE COVER PANEL |
|
|
LEFT SIDE SHUTTER ASSEMBLY - BLOCKS LIGHT FROM SCANNER ON LEFT SIDE |
|
|
M4X10 PHILLIPS SCREW WITH BROAD FLAT WASHER HEAD - SHEET METAL THREAD |
|
|
MAIN DRIVE ASSEMBLY - MAIN GEAR ASSEMBLY ON RIGHT SIDE OF PRINTER |
|
|
MAIN MOTOR - MOTOR ON FRONT RIGHT SIDE OF PRINTER - M101 |
|
|
MEMORY CABLE - FROM DC CONTROLLER BOARD TO THE TONER CARTRIDGE WIRELESS MEMORY C |
|
|
METAL ROD BETWEEN EXTERNAL POWER BUTTON AND SWITCH ON POWER SUPPLY BOARD |
|
|
PAPER DELIVERY ASSEMBLY - PAPER OUTPUT ROLLER ASSEMBLY |
|
|
PAPER FEED ASSEMBLY CLUTCH (CL101) - ELECTRO MECHANICAL CLUTCH THAT CONNECTS TO |
|
|
PAPER FEED BELT ASSEMBLY |
|
|
PAPER FEED BELT GUIDE FOR LEFT SIDE |
|
|
PAPER FEED BELT GUIDE FOR RIGHT SIDE |
|
|
PAPER FEED ROLLER ASSEMBLY |
|
|
PAPER FEED SENSOR FLAG - FOR TRAY 1 |
|
|
PAPER FEEDER ASSEMBLY PC BOARD - PC BOARD ON RIGHT SIDE OF 500 SHEET PAPER FEEDE |
|
|
PAPER PICKUP ARM - PICKUP AND FEED ROLLER HOLDER FOR TRAY 2 PAPER PICKUP ASSEMBL |
|
|
PAPER PICKUP ARM HOLDER - HOLDER FOR PICKUP ROLLER SHAFT |
|
|
PAPER PICKUP ASSEMBLY - PAPER PICKUP DRIVE ASSEMBLY FOR TRAY 1/MULTIPURPOSE INPU |
|
|
PAPER PICKUP DRIVE ASSEMBLY - GEAR ASSEMBLY ON RIGHT FRONT SIDE OF 500 SHEET PAP |
|
|
PAPER PICKUP ROLLER - GRAY SPONGY RUBBER ROLLER ON A WHITE CYLINDER AND 24-TOOTH |
|
|
PAPER PICKUP SOLENOID |
|
|
PAPER SENSOR FLAG FOR TRAY 2 PAPER PICKUP ASSEMBLY |
|
|
PAPER SENSOR FLAG HOLDER |
|
|
PAPER SIZE SENSING FLAG - WHITE PLASTIC ARM USED AS MECHANICAL LINK TO TRAY SIZE |
|
|
PAPER SIZE SENSOR BLOCK - SPRING LOADED BLOCK WHICH ACTIVATES THE PAPER SIZE SEN |
|
|
PAPER TRANSFER ASSEMBLY |
|
|
POWER CABLE FOR TRAY 3 PAPER FEEDER - BLACK CONNECTOR WITH 42MM SIX WIRE CABLE T |
|
|
POWER SUPPLY ASSEMBLY - 220VAC |
|
|
PRESSURE ROLLER - ROLLER IN FUSING ASSEMBLY THAT PROVIDES PRESSURE FOR MEDIA AGA |
|
|
REAR OUTPUT TRAY ASSEMBLY - INCLUDES UPPER REAR PAPER OUTPUT TRAY AND COVER |
|
|
REGISTRATION ROLLER ASSEMBLY |
|
|
RIGHT SIDE COVER ASSEMBLY |
|
|
RIGHT SIDE COVER FOR 500 SHEET PAPER FEEDER ASSEMBLY |
|
|
RIGHT SIDE TRAY 2 PAPER CASSETTE GUIDE |
|
|
SCREW - 6 MM PHILLIPS HEAD SCREW WITH ATTACHED WASHER |
|
|
SENSOR CABLE ASSEMBLY - FOR 500 SHEET FEEDER ASSEMBLY |
|
|
SUPPORT GUIDE - SUPPORTS RIGHT REAR SIDE OF POWER SUPPLY BOARD |
|
|
TENSION SPRING - PROVIDES TENSION FOR LIFTER DRIVE ASSEMBLY |
|
|
THERMISTOR HOLDER - METAL OUTSIDE HALF OF THERMISTOR HOLDER |
|
|
THERMISTOR HOLDER - PLASTIC INSIDE HALF OF THERMISTOR HOLDER |
|
|
TONER CARTRIDGE ARM - MECHANICAL LINK BETWEEN MAIN DRIVE ASSEMBLY AND TONER CART |
|
|
TOP BIN FULL SENSOR CABLE |
|
|
TOP COVER ASSEMBLY - TOP PAPER OUTPUT TRAY AND TOP OF PRINTER |
|
|
TOP COVER CABLE - FROM TOP COVER MICROSWITCH (SW101) TO DC CONTROLLER BOARD |
|
|
TOP COVER INTERLOCK ACCESS SWITCH |
|
|
TOP REAR COVER OF PRINTER - REMOVES FOR STAPLER/STACKER INSTALLATION |
|
|
TORQUE LIMITER - TORQUE LIMITER FOR 500 SHEET PAPER FEEDER PICKUP ROLLER |
|
|
TRANSFER ROLLER ASSEMBLY - LONG BLACK SPONGY ROLLER THAT TRANSFERS CHARGE TO PAP |
|
|
TRAY 1 PAPER INPUT ASSEMBLY |
|
|
TRAY 1 PICKUP ROLLER - D-SHAPED ROLLER LOCATED UNDER THE ENVELOPE COVER |
|
|
TRAY 1 SOLENOID - ENGAGES TRAY 1 PICK-UP ROLLER |
|
|
TRAY 2 LIFTER DRIVE ASSEMBLY - PROVIDES LIFT SUPPORT FOR PAPER TRAY |
|
|
TRAY 2 PAPER PICKUP SENSOR CABLE ASSEMBLY - CONNECTS TO SENSORS PS101 AND PS107 |
|
|
TRAY 2 PAPER SIZE TRAY SENSING ASSEMBLY - WHITE PLASTIC TRAY SIZE SENSING FINGER |