Manufacturer
HP
Model Number
Q5957A
Description
Laserjet 2420d Printer
Interactive Exploded View
Parts List
| Part Number | Description |
|---|---|
|
|
12-TOOTH GEAR - ON LEFT SIDE OF REGISTRATION ROLLER ASSEMBLY |
|
|
128MB, 100-PIN, DDR DIMM - USED TO ADD FLASH MEMORY-BASED ACCESSORY FONTS, MACRO |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL ARABIC FONT |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL CYRILLIC FONT |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL CYRILLIC FONT |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL GREEK FONT |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL GREEK FONT |
|
|
16MB COMPACT FLASH MEMORY CARD - TRADITIONAL HEBREW FONT |
|
|
17-TOOTH GEAR ASSEMBLY - INCLUDES THE 17-TOOTH GEAR MOUNTED ON A BLACK PLASTIC L |
|
|
19-TOOTH GEAR - LOCATED IN THE FUSER DRIVE ASSEMBLY ON RIGHT REAR OF PRINTER |
|
|
20-TOOTH GEAR - LOCATED IN THE FUSER DRIVE ASSEMBLY ON RIGHT REAR OF PRINTER |
|
|
21-TOOTH GEAR - LOCATED IN THE FUSER DRIVE ASSEMBLY ON RIGHT REAR OF PRINTER |
|
|
250-SHEET PAPER TRAY CASSETTE - PULL OUT CASSETTE THAT THE PAPER IS LOADED INTO |
|
|
256MB, 100-PIN, DDR DIMM - USED TO ADD FLASH MEMORY-BASED ACCESSORY FONTS, MACRO |
|
|
256MB, 100-PIN, DDR DIMM - USED TO ADD FLASH MEMORY-BASED ACCESSORY FONTS, MACRO |
|
|
32MB, 100-PIN, DDR DIMM - USED TO ADD FLASH MEMORY-BASED ACCESSORY FONTS, MACROS |
|
|
500-SHEET PAPER INPUT TRAY ASSEMBLY - FOR HP LASERJET 2400 SERIES - HOLDS LETTER |
|
|
500-SHEET PAPER INPUT TRAY CASSETTE - OPTIONAL TRAY 3 - FOR HP LASERJET 2400 SER |
|
|
500-SHEET SEPARATION PAD - SMALL RECTANGULAR RUBBER PAD ON FRONT OF CASSETTE ARM |
|
|
64MB, 100-PIN, DDR DIMM - USED TO ADD FLASH MEMORY-BASED ACCESSORY FONTS, MACROS |
|
|
AIR DUCT - INSIDE HALF OF AIR DUCT FROM FAN FM2 IN LOWER RIGHT FRONT CORNER OF |
|
|
AIR DUCT - OUTSIDE HALF OF AIR DUCT FROM FAN FM2 IN LOWER RIGHT FRONT CORNER OF |
|
|
BLACK TONER CARTRIDGE - FOR LASERJET 2410/2420 - PRINTS APPROXIMATELY 12,000 PAG |
|
|
BLACK TONER CARTRIDGE - FOR LASERJET 2410/2420/2430 - PRINTS APPROXIMATELY 6,000 |
|
|
CABLE CLIP - 'C' SHAPED WHITE PLASTIC |
|
|
CABLE COVER - FUSER CABLE COVER - BLACK PLASTIC COVER THAT PROTECTS CABLE IN LEF |
|
|
CABLE GUIDE - SMALL BLACK PLASTIC TRAY THAT SUPPORTS AND PROTECTS CABLES THAT GO |
|
|
CAM - LOCATED BETWEEN LARGE WHITE 201-TOOTH GEAR AND DRIVE RELEASE LEVER |
|
|
CARTRIDGE CLAMP LEVER - ATTACHES TO UPPER LEFT TONER CARTRIDGE GUIDE - PROVIDES |
|
|
CARTRIDGE GUIDE - LOWER RIGHT SIDE TONER CARTRIDGE GUIDE |
|
|
CARTRIDGE LEVER - LINK THAT PUSHES CONTACT CAM AND PROTECTIVE PLATE WHEN CARTRID |
|
|
CASSETTE GUIDE - REAR LEFT BLACK PLASTIC PAPER CASSETTE GUIDE |
|
|
CASSETTE GUIDE - RIGHT FRONT SIDE BLACK PLASTIC PAPER CASSETTE GUIDE |
|
|
CASSETTE GUIDE - RIGHT REAR BLACK PLASTIC PAPER CASSETTE GUIDE |
|
|
COLOR LASERJET TRANSPARENCY FILM - A SIZE (8.5 X 11-INCHES) - 50 SHEETS |
|
|
COMPACT FLASH CARD - TRADITIONAL ARABIC FONT |
|
|
COMPACT FLASH CARD - TRADITIONAL HEBREW FONT |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE FOR E-READER HOLDER |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE FOR THE LARGE 201-TOOTH WHITE GEAR ON RIG |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE FOR TRAY 1 SEPERATION PAD |
|
|
COMPRESSION SPRING - PROVIDES PRESSURE TO GROUNDING CONTACT LINK ON LEFT SIDE OF |
|
|
COMPRESSION SPRING - RIGHT SIDE TRANSFER ROLLER SPRING - PROVIDES TENSION FOR TR |
|
|
COMPRESSION SPRING - SPRING PROVIDES PRESSURE TO THE LASER SHUTTER WHICH WHEN PU |
|
|
COMPRESSION SPRING - SPRING UNDER TRANSFER PLATE THAT PROVIDES ELECTRICAL CONNEC |
|
|
CONTACT CAM - VERTICAL PIECE THAT INSERTS INTO PROTECTIVE PLATE |
|
|
CONTINUITY CAP - GEAR RETAINER FOR 30 TOOTH TRAY 1 PICKUP ROLLER SHAFT |
|
|
CONTROL PANEL ASSEMBLY - CONTROL PANEL MOUNTED ON TOP RIGHT CORNER OF PRINTER |
|
|
CONTROL PANEL OVERLAY (CZECHOSLOVAKIAN, POLISH AND HUNGARIAN) |
|
|
CONTROL PANEL OVERLAY (DUTCH, PORTUGUESE AND SPANISH) |
|
|
CONTROL PANEL OVERLAY (FINNISH, NORWEGIAN AND SWEDISH) |
|
|
CONTROL PANEL OVERLAY - ARABIC |
|
|
CONTROL PANEL OVERLAY - DANISH |
|
|
CONTROL PANEL OVERLAY - ENGLISH |
|
|
CONTROL PANEL OVERLAY - FRENCH |
|
|
CONTROL PANEL OVERLAY - GREEK |
|
|
CONTROL PANEL OVERLAY - HEBREW |
|
|
CONTROL PANEL OVERLAY - KOREAN |
|
|
CONTROL PANEL OVERLAY - RUSSIAN AND TURKISH |
|
|
CONTROL PANEL OVERLAY - SIMPLIFIED CHINESE |
|
|
CONTROL PANEL OVERLAY - THAILAND |
|
|
CONTROL PANEL OVERLAY - TRADITIONAL CHINESE |
|
|
CONTROL PANEL OVERLAY - TURKISH |
|
|
COOLING FAN - FAN FM2 - LOCATED ON LOWER LEFT SIDE OF PRINTER |
|
|
COOLING FAN - MAIN COOLING FAN FM1 - LOCATED IN LOWER RIGHT FRONT SIDE |
|
|
COUPLING LEVER - WHITE PLASTIC LEVER BETWEEN LARGE WHITE GEAR CAM AND DRIVE RELE |
|
|
COVER FOR MAIN MOTOR M1 - LOCATED ON LOWER RIGHT SIDE OF PRINTER |
|
|
DELIVERY ROLLER - FACE DOWN OUTPUT ROLLER |
|
|
DELIVERY ROLLER - SMALL PAPER DELIVERY ROLLERS AT TOP REAR OF PRINTER - FOUR USE |
|
|
DOOR ARM - WHITE PLASTIC ARM THAT CONNECTS TO LEFT SIDE CARTRIDGE ACCESS DOOR |
|
|
DOOR ARM GUIDE - WHITE PLASTIC GUIDE FOR CARTRIDGE DOOR LEVER |
|
|
DOOR ASSEMBLY - CARTRIDGE ACCESS DOOR ASSEMBLY BEHIND DROP DOWN TRAY 1 ASSEMBLY |
|
|
DRAWER CONNECTOR - CONNECTOR LOCATED ON TOP OF TRAY ASSEMBLY FRAME (RIGHT SIDE), |
|
|
DRIVE RELEASE ASSEMBLY |
|
|
DRIVE RELEASE LEVER |
|
|
DRIVE RELEASE LINK - |
|
|
E-LABEL READER HOLDER - HOUSING THAT HOLDS CARTRIDGE E-LABEL READER |
|
|
ELECTRIC STEPPER MOTOR - FUSER DRIVE ASSEMBLY MOTOR - MOTOR M2 |
|
|
ENGINE CONTROLLER ASSEMBLY - ENGINE CONTROLLER PC BOARD AND METAL PAN - 220-240 |
|
|
FACE DOWN OUTPUT ROLLER - PAPER EXIT ROLLER - BLACK PLASTIC SHAFT WITH FOUR ROLL |
|
|
FACE DOWN ROLLER - SMALL INDIVIDUAL FEED ROLLER THAT RIDES AGAINST FACE DOWN SHA |
|
|
FAN HOLDER - FM2 FAN HOLDER HOUSING |
|
|
FEED GUIDE ASSEMBLY - MOUNTS ABOVE TRANSFER ROLLER ASSEMBLY |
|
|
FRONT BASE PLATE - METAL PLATE THAT FITS UNDER FUSER ASSEMBLY |
|
|
FUSER DRIVE SIDE PLATE ASSEMBLY - DRIVE GEAR ASSEMBLY AND MOUNTING PLATE FOR FUS |
|
|
GEAR - 30-TOOTH - ATTACHES TO RIGHT SIDE END OF TRAY 1 PICKUP ROLLER SHAFT |
|
|
GEAR - LARGE WHITE PLASTIC 201 TOOTH GEAR ON RIGHT SIDE OF PRINTER |
|
|
GEAR COVER - COVERS FUSING AND DUPLEXER GEARS ON LOWER RIGHT REAR OF PRINTER |
|
|
GEAR STOPPER - SMALL BUSHING BETWEEN RIGHT SIDE OF REGISTRATION ASSEMBLY AND REG |
|
|
GROUNDING CONTACT - TINY U-SHAPED METAL CARTRIDGE GROUNDING CONTACT - CONTACTS C |
|
|
GROUNDING CONTACT LEVER - LEVER ON LEFT SIDE THAT IS MOVED BY CONTACT WHEN THE T |
|
|
GROUNDING CONTACT LEVER - LEVER ON LEFT SIDE THAT PUSHES BOTH CONTACT SPRINGS AG |
|
|
GROUNDING PLATE - HIGH VOLTAGE POWER SUPPLY GROUNDING PLATE - ATTACHES TO LEFT R |
|
|
GUIDE ASSEMBLY - DUPLEXER PORTION PAPER INPUT GUIDE ASSEMBLY |
|
|
HIGH VOLTAGE POWER SUPPLY BOARD |
|
|
HP COLOR LASER SOFT-GLOSS PRESENTATION PAPER - A SIZE (8.5 X 11-INCHES) - 200 SH |
|
|
HP JETDIRECT 170X EXTERNAL PRINT SERVER MODULE (10BASE-T) - CONNECTS BETWEEN PRI |
|
|
HP JETDIRECT 380X EXTERNAL IEEE-802.11B (WI-FI) WIRELESS PRINT SERVER - CONNECTS |
|
|
HP JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BO |
|
|
HP JETDIRECT 635N IPV6/IPSEC PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE |
|
|
HP JETDIRECT 680N INTERNAL WIRELESS IEEE-802.11B (WI-FI) PRINT SERVER - PLUGS IN |
|
|
HP JEWEL - SMALL PLASTIC HP LOGO THAT ATTACHES TO TOP OF PRINTER |
|
|
HP LASERJET 2400 SERIES PRINT CARTRIDGE - PRINTS APPROXIMATELY 12,000 PAGES |
|
|
HP LASERJET 2400 SERIES PRINT CARTRIDGE - PRINTS APPROXIMATELY 6,000 PAGES |
|
|
HP MULTIPURPOSE PAPER - A SIZE (8.5 X 11-INCHES) - 500 SHEETS |
|
|
IDLER ROLLER (PLASTIC) - FREE WHEELING ROLLER - TWO USED |
|
|
INNER BUSHING - BUSHING THAT LARGE WHITE 201 TOOTH DRIVE GEAR RIDES ON |
|
|
JETDIRECT 620N INTERNAL PRINT SERVER - 10BASET AND 100BASETX LAN INTERFACE BOARD |
|
|
JETDIRECT 625N ETHERNET PRINT SERVER - PROVIDES 10BASET, 100BASETX, OR 1000BASET |
|
|
JETDIRECT 680N INTERNAL WIRELESS IEEE-802.11B (WI-FI) PRINT SERVER (USA) |
|
|
JETDIRECT CONNECTIVITY CARD - HAS ONE USB PORT, ONE SERIAL (DB9) PORT, AND ONE L |
|
|
LASER SHUTTER LINK - ENABLES THE LASER SCANNER SHUTTER BY PRESSING UP THIS LINK |
|
|
LASER/SCANNER ASSEMBLY - MOUNTS ON TOP OF PRINT STRUCTURE |
|
|
LASERJET 2400 SERIES SERVICE MANUAL - ENGLISH |
|
|
LASERJET 2410/20/30 32MB FLASH MEMORY MODULE - VERSION 08.112.3 |
|
|
LATCH PLATE - FOR FRONT DOOR SNAP |
|
|
LEAF SPRING - LEAF SPRING THAT PROVIDES ELECTRICAL CONNECTION TO LEFT SIDE OF TO |
|
|
LEAF SPRING - LEAF SPRING THAT PROVIDES ELECTRICAL CONNECTION TO LEFT SIDE OF TO |
|
|
LEFT COVER - LEFT SIDE OF PRINTER PLASTIC COVER |
|
|
LEFT FRONT GUIDE - SMALL BLACK PLASTIC PIECE ON FRONT LEFT SIDE OF CHASSIS IN TR |
|
|
LEFT LOWER TONER CARTRIDGE GUIDE |
|
|
LEFT MIDDLE GUIDE - SMALL BLACK PLASTIC CASSETTE GUIDE ON LEFT SIDE OF PRINTER |
|
|
LEFT UPPER TONER CARTRIDGE GUIDE |
|
|
LEGAL DUST COVER - FOR TRAY 2 |
|
|
LOWER FEED GUIDE ASSEMBLY |
|
|
M3 X 8MM PAN HEAD PHILLIPS SCREW WITH CAPTIVE FLAT AND SPLIT-LOCK WASHERS |
|
|
M4 PAN-HEAD PHILLIPS SCREW WITH SELF-TAPPING THREADS - 10MM LONG |
|
|
MACHINE SCREW WITH ATTACHED WASHER - M3, 6MM - USED TO HOLD PLASTIC TO METAL |
|
|
MACHINE SCREW WITH ATTACHED WASHER - M3, 8MM - USED TO HOLD PLASTIC TO METAL |
|
|
MAIN FAN HOLDER - PLASTIC FAN HOLDER FOR MAIN COOLING FAN FM1 - LOCATED LOWER RI |
|
|
MAIN MOTOR - 26.2 WATT DC MOTOR ON LOWER RIGHT SIDE OF PRINTER - MOTOR M1 |
|
|
MAINTENANCE KIT - LASERJET 2400 MAINTENANCE KIT - INCLUDES 120 VAC FUSING ROLLER |
|
|
MICROSWITCH - DOOR OPEN SWITCH (SW501) |
|
|
MP/TRAY 1 COVER ASSEMBLY - INCLUDES DROP DOWN, PULL OUT AND FLIP OUT TRAYS |
|
|
MP/TRAY 1 SUPPORT ASSEMBLY - HINGED SUPPORT AND ADJUSTABLE PAPER WIDTH GUIDE ASS |
|
|
PAPER FEED GUIDE ASSEMBLY |
|
|
PAPER GUIDE - LOCATED UNDER THE REGISTRATION ROLLER ASSEMBLY |
|
|
PAPER PICKUP ASSEMBLY - TRAY 2 PAPER PICKUP ASSEMBLY |
|
|
PAPER SENSOR LEVER - MECHANICAL DEVICE THAT ACTIVATES PHOTO SENSOR (PS902) - FOR |
|
|
PICKUP ROLLER - TRAY 2 PAPER PICKUP ROLLER |
|
|
PLASTIC DUCT THAT VENTS AIR FROM THE LOWER RIGHT FRONT FAN TO THE LASER/SCANNER. |
|
|
PLATE HOLDER - HOLDS THE LEFT REAR CORNER OF THE PAPER ACCESS PLATE (DUPLEX PAN) |
|
|
POSITION GUIDE ASSEMBLY - GUIDES THE PAPER ALONG THE RIGHT SIDE DUPLEX PATH - AT |
|
|
POWER SWITCH - LOCATED AT LOWER RIGHT REAR SIDE OF PRINTER |
|
|
PRINTER DRIVE ASSEMBLY - LOCATED ON THE RIGHT SIDE OF PRINTER |
|
|
PROTECTIVE PLATE |
|
|
READER AND CABLE - E-LABEL READER CONTACT MECHANISM - CONNECTION TO READ DATA FR |
|
|
READER HOLDER COVER - PLASTIC HOUSING THAT COVERS CARTRIDGE E-LABEL READER AND H |
|
|
REAR COVER ASSEMBLY - DROP DOWN FACE UP PAPER OUTPUT TRAY ASSEMBLY |
|
|
REGISTRATION CABLE ASSEMBLY - INCLUDES 7P AND 3P CONNECTORS |
|
|
REGISTRATION ROLLER ASSEMBLY - TWO ROLLER SHAFTS WITH SIX ROLLERS EACH AND FRAME |
|
|
REGISTRATION ROLLER ASSEMBLY COVER |
|
|
REGISTRATION ROLLER GEAR - MOUNTS ON THE END OF THE REGISTRATION ROLLER - 14-TO |
|
|
REGISTRATION SENSOR - TOP OF PAGE PHOTOSENSOR PC BOARD - PS901 |
|
|
REPLACEMENT GEAR KIT - INCLUDES 19,20,AND 21 TOOTH GEARS |
|
|
RIGHT BASE PLATE - METAL PLATE UNDER RIGHT SIDE OF PRINTER |
|
|
RIGHT FRONT COVER - RIGHT FRONT CORNER OF PRINTER COVER |
|
|
RIGHT LOWER COVER - SMALL COVER UNDER SLIDE OUT DIMM ACCESS COVER |
|
|
RIGHT REAR COVER - VERTICAL COVER AT RIGHT REAR OF PRINTER - COVERS POWER INPUT |
|
|
RIGHT SIDE COVER - REMOVABLE RIGHT SIDE COVER FOR ACCESS TO DIMM MEMORY |
|
|
ROLLER ASSEMBLY - BLACK PLASTIC HOUSING THAT HOLDS ROLLERS IN FRONT OF TRAY 2 PI |
|
|
ROLLER BUSHING - RIGHT SIDE TRANSFER ROLLER BUSHING |
|
|
ROLLER GEAR - WHITE PLASTIC 15 TOOTH GEAR THAT ATTACHES TO END OF FACE-DOWN PAPE |
|
|
ROLLER HOLDER - HOLDER FOR SMALL PAPER DELIVERY ROLLERS AT TOP REAR OF PRINTER - |
|
|
RUBBER FOOT - FOR BOTTOM OF PRINTER - THREE USED |
|
|
SENSOR LEVER - TOP OF PAGE SENSOR FLAG - USED TO DETECT EDGE OF PAPER |
|
|
SEPARATION PAD HOLDER |
|
|
SHAFT BUSHING/RETAINER - SMALL PLASTIC CYLINDER WITH FOUR NUBS THAT TWIST - LOCK |
|
|
SMALL VENT DUCT TO ROUTE AIR FROM THE FAN (FM2) TO THE CARTRIDGE AREA |
|
|
SNAP-IN CABLE CLAMP |
|
|
SOFT GLOSS LASERJET PAPER - SOFT GLOSS FINISH ON BOTH SIDES, 95 BRIGHTNESS - A S |
|
|
SOLENOID HOLDER/MOUNT - SOLENOID MOUNT FOR SOLENOID SL2 |
|
|
SPRING - PROVIDES TENSION FOR POWER SWITCH |
|
|
STATIC CHARGE ELIMINATOR - COMB THAT MOUNTS ABOVE UPPER DELIVERY ROLLER THAT DIS |
|
|
SWITCH LINK - MECHANICAL LINK BETWEEN POWER BUTTON AND ECU BOARD |
|
|
SWITCH LINK HOLDER - SUPPORTS MECHANICAL LINK BETWEEN POWER BUTTON AND ECU BOARD |
|
|
TENSION SPRING - PROVIDES TENSION FOR CARTRIDGE ACCESS DOOR ARM |
|
|
TENSION SPRING - PROVIDES TENSION FOR CARTRIDGE CLAMP LEVER THAT HOLDS LEFTS SID |
|
|
TENSION SPRING - PROVIDES TENSION FOR WHITE PLASTIC ARM ON LEFT SIDE OF CARTRIDG |
|
|
TEST SWITCH LEVER - MECHANICAL LINK TO TEST ENGINE SWITCH |
|
|
TOP COVER ASSEMBLY - TOP OF PRINTER COVER AND FACE DOWN PAPER OUTPUT TRAY ASSEMB |
|
|
TORSION SPRING - PROVIDES PRESSURE TO MOVE PROTECTIVE PLATE BACK INTO CARTRIDGE |
|
|
TORSION SPRING - PROVIDES TENSION AND HOLDS SMALL INDIVIDUAL FEED ROLLER THAT RI |
|
|
TORSION SPRING - PROVIDES TENSION FOR TOP OF PAGE SENSOR FLAG |
|
|
TORSION SPRING - PROVIDES TENSION FOR TRAY 1 PAPER SENSOR FLAG |
|
|
TORSION SPRING - TINY SPRING THAT ATTACHES TO SMALL METAL U-SHAPED CARTRIDGE GRO |
|
|
TORSION SPRING - TINY SPRING THAT ATTACHES TO SMALL METAL U-SHAPED CARTRIDGE GRO |
|
|
TRANSFER PLATE - PAPER GUIDE PLATE THAT MOUNTS UNDER TRANSFER ROLLER ASSEMBLY |
|
|
TRANSFER ROLLER ASSEMBLY - LONG METAL SHAFT WITH BLACK ROLLER - INCLUDES RIGHT |
|
|
TRAY 1 PAPER PICKUP SOLENOID - SOLENOID SL1 |
|
|
TRAY 1/MP TRAY PICKUP ROLLER - D-SHAPED REPLACEMENT PICKUP ROLLER |
|
|
TRAY 1/MP TRAY PICKUP ROLLER SHAFT ASSEMBLY - INCLUDES ROLLER SHAFT, BUSHINGS AN |
|
|
TRAY HINGE - LEFT SIDE HINGE FOR DROP DOWN TRAY 1 ASSEMBLY |
|
|
TRAY HINGE - RIGHT SIDE HINGE FOR DROP DOWN TRAY 1 ASSEMBLY |
|
|
UPPER RIGHT TONER CARTRIDGE GUIDE |
|
|
WHITE ADDRESS LABELS - 1.3CM (0.5IN) X 4.4CM (1.7IN) - 80 LABELS PER SHEET, 25 S |
|
|
WHITE ADDRESS LABELS - 3.4CM (1.3IN) X 10CM (4IN) - 14 LABELS PER SHEET, 100 SHE |
|
|
WHITE ADDRESS LABELS - 3.4CM (1.3IN) X 10CM (4IN) - 14 LABELS PER SHEET, 25 SHEE |
|
|
WHITE ADDRESS LABELS - 5CM (2IN) X 10CM (4IN) - 10 LABELS PER SHEET, 25 SHEETS P |
|
|
WHITE ADDRESS LABELS - 8.4CM (3.3IN) X 10CM (4IN) - 6 LABELS PER SHEET, 100 SHEE |
|
|
WHITE FULL-SHEET LABELS - A SIZE (8.5 X 11-INCHES) - 100 SHEETS |
|
|
WHITE FULL-SHEET LABELS - A SIZE (8.5 X 11-INCHES) - 25 SHEETS |
|
|
WHITE LABELS - 2.5CM (1.0IN) X 6.6CM (2.6IN) - 30 LABELS PER SHEET, 100 SHEETS P |
|
|
WHITE LABELS - 2.5CM (1.0IN) X 6.6CM (2.6IN) - 30 LABELS PER SHEET, 25 SHEETS PE |